Dear maintainer:
During a rebuild of all packages in unstable, your package failed to build.
Below you will find how the build ends (probably the most relevant part,
but not necessarily). If required, the full build log is available here:
https://people.debian.org/~sanvila/build-logs/202509/
About the archive rebuild: The build was made on virtual machines from AWS,
using sbuild and a reduced chroot with only build-essential packages.
If you could not reproduce the bug please contact me privately, as I
am willing to provide ssh access to a virtual machine where the bug is
fully reproducible.
If this is really a bug in one of the build-depends, please use
reassign and add an affects on src:pgplot5, so that this is still
visible in the BTS web page for this package.
Thanks.
--------------------------------------------------------------------------------
[...]
debian/rules clean
dh clean --builddirectory=debian/builddir
debian/rules override_dh_auto_clean
make[1]: Entering directory '/<<PKGBUILDDIR>>'
test ! -f sys_linux/g77_gcc.conf.orig || mv sys_linux/g77_gcc.conf.orig sys_linux/g77_gcc.conf
rm -rf static shared
rm -f build-stamp install-stamp
rm -rf debian/builddir
rm -f debian/*substvars
dh_auto_clean
make[1]: Leaving directory '/<<PKGBUILDDIR>>'
dh_autoreconf_clean -O--builddirectory=debian/builddir
dh_clean -O--builddirectory=debian/builddir
debian/rules binary
[... snipped ...]
| ^~~~~~~
cpgqls.c: In function ‘cpgqls’:
cpgqls.c:6:3: error: too many arguments to function ‘pgqls_’; expected 0, have 1
6 | pgqls_(ls);
| ^~~~~~ ~~
cpgqls.c:2:13: note: declared here
2 | extern void pgqls_();
| ^~~~~~
cpgqlw.c: In function ‘cpgqlw’:
cpgqlw.c:6:3: error: too many arguments to function ‘pgqlw_’; expected 0, have 1
6 | pgqlw_(lw);
| ^~~~~~ ~~
cpgqlw.c:2:13: note: declared here
2 | extern void pgqlw_();
| ^~~~~~
cpgqndt.c: In function ‘cpgqndt’:
cpgqndt.c:6:3: error: too many arguments to function ‘pgqndt_’; expected 0, have 1
6 | pgqndt_(n);
| ^~~~~~~ ~
cpgqndt.c:2:13: note: declared here
2 | extern void pgqndt_();
| ^~~~~~~
cpgqpos.c: In function ‘cpgqpos’:
cpgqpos.c:6:3: error: too many arguments to function ‘pgqpos_’; expected 0, have 2
6 | pgqpos_(x, y);
| ^~~~~~~ ~
cpgqpos.c:2:13: note: declared here
2 | extern void pgqpos_();
| ^~~~~~~
cpgqtbg.c: In function ‘cpgqtbg’:
cpgqtbg.c:6:3: error: too many arguments to function ‘pgqtbg_’; expected 0, have 1
6 | pgqtbg_(tbci);
| ^~~~~~~ ~~~~
cpgqtbg.c:2:13: note: declared here
2 | extern void pgqtbg_();
| ^~~~~~~
cpgqtxt.c: In function ‘cpgqtxt’:
cpgqtxt.c:8:3: error: too many arguments to function ‘pgqtxt_’; expected 0, have 8
8 | pgqtxt_(&x, &y, &angle, &fjust, (char *)text, xbox, ybox, len_text);
| ^~~~~~~ ~~
cpgqtxt.c:3:13: note: declared here
3 | extern void pgqtxt_();
| ^~~~~~~
cpgqvp.c: In function ‘cpgqvp’:
cpgqvp.c:6:3: error: too many arguments to function ‘pgqvp_’; expected 0, have 5
6 | pgqvp_(&units, x1, x2, y1, y2);
| ^~~~~~ ~~~~~~
cpgqvp.c:2:13: note: declared here
2 | extern void pgqvp_();
| ^~~~~~
cpgqvsz.c: In function ‘cpgqvsz’:
cpgqvsz.c:6:3: error: too many arguments to function ‘pgqvsz_’; expected 0, have 5
6 | pgqvsz_(&units, x1, x2, y1, y2);
| ^~~~~~~ ~~~~~~
cpgqvsz.c:2:13: note: declared here
2 | extern void pgqvsz_();
| ^~~~~~~
cpgqwin.c: In function ‘cpgqwin’:
cpgqwin.c:6:3: error: too many arguments to function ‘pgqwin_’; expected 0, have 4
6 | pgqwin_(x1, x2, y1, y2);
| ^~~~~~~ ~~
cpgqwin.c:2:13: note: declared here
2 | extern void pgqwin_();
| ^~~~~~~
cpgrect.c: In function ‘cpgrect’:
cpgrect.c:6:3: error: too many arguments to function ‘pgrect_’; expected 0, have 4
6 | pgrect_(&x1, &x2, &y1, &y2);
| ^~~~~~~ ~~~
cpgrect.c:2:13: note: declared here
2 | extern void pgrect_();
| ^~~~~~~
cpgrnd.c: In function ‘cpgrnd’:
cpgrnd.c:7:13: error: too many arguments to function ‘pgrnd_’; expected 0, have 2
7 | r_value = pgrnd_(&x, nsub);
| ^~~~~~ ~~
cpgrnd.c:2:14: note: declared here
2 | extern float pgrnd_();
| ^~~~~~
cpgrnge.c: In function ‘cpgrnge’:
cpgrnge.c:6:3: error: too many arguments to function ‘pgrnge_’; expected 0, have 4
6 | pgrnge_(&x1, &x2, xlo, xhi);
| ^~~~~~~ ~~~
cpgrnge.c:2:13: note: declared here
2 | extern void pgrnge_();
| ^~~~~~~
cpgsah.c: In function ‘cpgsah’:
cpgsah.c:6:3: error: too many arguments to function ‘pgsah_’; expected 0, have 3
6 | pgsah_(&fs, &angle, &barb);
| ^~~~~~ ~~~
cpgsah.c:2:13: note: declared here
2 | extern void pgsah_();
| ^~~~~~
cpgscf.c: In function ‘cpgscf’:
cpgscf.c:6:3: error: too many arguments to function ‘pgscf_’; expected 0, have 1
6 | pgscf_(&font);
| ^~~~~~ ~~~~~
cpgscf.c:2:13: note: declared here
2 | extern void pgscf_();
| ^~~~~~
cpgsch.c: In function ‘cpgsch’:
cpgsch.c:6:3: error: too many arguments to function ‘pgsch_’; expected 0, have 1
6 | pgsch_(&size);
| ^~~~~~ ~~~~~
cpgsch.c:2:13: note: declared here
2 | extern void pgsch_();
| ^~~~~~
cpgsci.c: In function ‘cpgsci’:
cpgsci.c:6:3: error: too many arguments to function ‘pgsci_’; expected 0, have 1
6 | pgsci_(&ci);
| ^~~~~~ ~~~
cpgsci.c:2:13: note: declared here
2 | extern void pgsci_();
| ^~~~~~
cpgscir.c: In function ‘cpgscir’:
cpgscir.c:6:3: error: too many arguments to function ‘pgscir_’; expected 0, have 2
6 | pgscir_(&icilo, &icihi);
| ^~~~~~~ ~~~~~~
cpgscir.c:2:13: note: declared here
2 | extern void pgscir_();
| ^~~~~~~
cpgsclp.c: In function ‘cpgsclp’:
cpgsclp.c:6:3: error: too many arguments to function ‘pgsclp_’; expected 0, have 1
6 | pgsclp_(&state);
| ^~~~~~~ ~~~~~~
cpgsclp.c:2:13: note: declared here
2 | extern void pgsclp_();
| ^~~~~~~
cpgscr.c: In function ‘cpgscr’:
cpgscr.c:6:3: error: too many arguments to function ‘pgscr_’; expected 0, have 4
6 | pgscr_(&ci, &cr, &cg, &cb);
| ^~~~~~ ~~~
cpgscr.c:2:13: note: declared here
2 | extern void pgscr_();
| ^~~~~~
cpgscrl.c: In function ‘cpgscrl’:
cpgscrl.c:6:3: error: too many arguments to function ‘pgscrl_’; expected 0, have 2
6 | pgscrl_(&dx, &dy);
| ^~~~~~~ ~~~
cpgscrl.c:2:13: note: declared here
2 | extern void pgscrl_();
| ^~~~~~~
cpgscrn.c: In function ‘cpgscrn’:
cpgscrn.c:8:3: error: too many arguments to function ‘pgscrn_’; expected 0, have 4
8 | pgscrn_(&ci, (char *)name, ier, len_name);
| ^~~~~~~ ~~~
cpgscrn.c:3:13: note: declared here
3 | extern void pgscrn_();
| ^~~~~~~
cpgsfs.c: In function ‘cpgsfs’:
cpgsfs.c:6:3: error: too many arguments to function ‘pgsfs_’; expected 0, have 1
6 | pgsfs_(&fs);
| ^~~~~~ ~~~
cpgsfs.c:2:13: note: declared here
2 | extern void pgsfs_();
| ^~~~~~
cpgshls.c: In function ‘cpgshls’:
cpgshls.c:6:3: error: too many arguments to function ‘pgshls_’; expected 0, have 4
6 | pgshls_(&ci, &ch, &cl, &cs);
| ^~~~~~~ ~~~
cpgshls.c:2:13: note: declared here
2 | extern void pgshls_();
| ^~~~~~~
cpgshs.c: In function ‘cpgshs’:
cpgshs.c:6:3: error: too many arguments to function ‘pgshs_’; expected 0, have 3
6 | pgshs_(&angle, &sepn, &phase);
| ^~~~~~ ~~~~~~
cpgshs.c:2:13: note: declared here
2 | extern void pgshs_();
| ^~~~~~
cpgsitf.c: In function ‘cpgsitf’:
cpgsitf.c:6:3: error: too many arguments to function ‘pgsitf_’; expected 0, have 1
6 | pgsitf_(&itf);
| ^~~~~~~ ~~~~
cpgsitf.c:2:13: note: declared here
2 | extern void pgsitf_();
| ^~~~~~~
cpgslct.c: In function ‘cpgslct’:
cpgslct.c:6:3: error: too many arguments to function ‘pgslct_’; expected 0, have 1
6 | pgslct_(&id);
| ^~~~~~~ ~~~
cpgslct.c:2:13: note: declared here
2 | extern void pgslct_();
| ^~~~~~~
cpgsls.c: In function ‘cpgsls’:
cpgsls.c:6:3: error: too many arguments to function ‘pgsls_’; expected 0, have 1
6 | pgsls_(&ls);
| ^~~~~~ ~~~
cpgsls.c:2:13: note: declared here
2 | extern void pgsls_();
| ^~~~~~
cpgslw.c: In function ‘cpgslw’:
cpgslw.c:6:3: error: too many arguments to function ‘pgslw_’; expected 0, have 1
6 | pgslw_(&lw);
| ^~~~~~ ~~~
cpgslw.c:2:13: note: declared here
2 | extern void pgslw_();
| ^~~~~~
cpgstbg.c: In function ‘cpgstbg’:
cpgstbg.c:6:3: error: too many arguments to function ‘pgstbg_’; expected 0, have 1
6 | pgstbg_(&tbci);
| ^~~~~~~ ~~~~~
cpgstbg.c:2:13: note: declared here
2 | extern void pgstbg_();
| ^~~~~~~
cpgsubp.c: In function ‘cpgsubp’:
cpgsubp.c:6:3: error: too many arguments to function ‘pgsubp_’; expected 0, have 2
6 | pgsubp_(&nxsub, &nysub);
| ^~~~~~~ ~~~~~~
cpgsubp.c:2:13: note: declared here
2 | extern void pgsubp_();
| ^~~~~~~
cpgsvp.c: In function ‘cpgsvp’:
cpgsvp.c:6:3: error: too many arguments to function ‘pgsvp_’; expected 0, have 4
6 | pgsvp_(&xleft, &xright, &ybot, &ytop);
| ^~~~~~ ~~~~~~
cpgsvp.c:2:13: note: declared here
2 | extern void pgsvp_();
| ^~~~~~
cpgswin.c: In function ‘cpgswin’:
cpgswin.c:6:3: error: too many arguments to function ‘pgswin_’; expected 0, have 4
6 | pgswin_(&x1, &x2, &y1, &y2);
| ^~~~~~~ ~~~
cpgswin.c:2:13: note: declared here
2 | extern void pgswin_();
| ^~~~~~~
cpgtbox.c: In function ‘cpgtbox’:
cpgtbox.c:9:3: error: too many arguments to function ‘pgtbox_’; expected 0, have 8
9 | pgtbox_((char *)xopt, &xtick, &nxsub, (char *)yopt, &ytick, &nysub, len_xopt, len_yopt);
| ^~~~~~~ ~~~~~~~~~~~~
cpgtbox.c:3:13: note: declared here
3 | extern void pgtbox_();
| ^~~~~~~
cpgtext.c: In function ‘cpgtext’:
cpgtext.c:8:3: error: too many arguments to function ‘pgtext_’; expected 0, have 4
8 | pgtext_(&x, &y, (char *)text, len_text);
| ^~~~~~~ ~~
cpgtext.c:3:13: note: declared here
3 | extern void pgtext_();
| ^~~~~~~
cpgtick.c: In function ‘cpgtick’:
cpgtick.c:8:3: error: too many arguments to function ‘pgtick_’; expected 0, have 11
8 | pgtick_(&x1, &y1, &x2, &y2, &v, &tikl, &tikr, &disp, &orient, (char *)str, len_str);
| ^~~~~~~ ~~~
cpgtick.c:3:13: note: declared here
3 | extern void pgtick_();
| ^~~~~~~
cpgvect.c: In function ‘cpgvect’:
cpgvect.c:6:3: error: too many arguments to function ‘pgvect_’; expected 0, have 12
6 | pgvect_((float *)a, (float *)b, &idim, &jdim, &i1, &i2, &j1, &j2, &c, &nc, (float *)tr, &blank);
| ^~~~~~~ ~~~~~~~~~~
cpgvect.c:2:13: note: declared here
2 | extern void pgvect_();
| ^~~~~~~
cpgvsiz.c: In function ‘cpgvsiz’:
cpgvsiz.c:6:3: error: too many arguments to function ‘pgvsiz_’; expected 0, have 4
6 | pgvsiz_(&xleft, &xright, &ybot, &ytop);
| ^~~~~~~ ~~~~~~
cpgvsiz.c:2:13: note: declared here
2 | extern void pgvsiz_();
| ^~~~~~~
cpgwedg.c: In function ‘cpgwedg’:
cpgwedg.c:9:3: error: too many arguments to function ‘pgwedg_’; expected 0, have 8
9 | pgwedg_((char *)side, &disp, &width, &fg, &bg, (char *)label, len_side, len_label);
| ^~~~~~~ ~~~~~~~~~~~~
cpgwedg.c:3:13: note: declared here
3 | extern void pgwedg_();
| ^~~~~~~
cpgwnad.c: In function ‘cpgwnad’:
cpgwnad.c:6:3: error: too many arguments to function ‘pgwnad_’; expected 0, have 4
6 | pgwnad_(&x1, &x2, &y1, &y2);
| ^~~~~~~ ~~~
cpgwnad.c:2:13: note: declared here
2 | extern void pgwnad_();
| ^~~~~~~
make[2]: *** [makefile:943: libcpgplot.a] Error 1
make[2]: Leaving directory '/<<PKGBUILDDIR>>/debian/builddir'
make[1]: *** [debian/rules:70: override_dh_auto_build] Error 2
make[1]: Leaving directory '/<<PKGBUILDDIR>>'
make: *** [debian/rules:57: binary] Error 2
dpkg-buildpackage: error: debian/rules binary subprocess returned exit status 2
--------------------------------------------------------------------------------