Dear maintainer:
During a rebuild of all packages in unstable, this package failed to build.
Below you will find the last part of the build log (probably the most
relevant part, but not necessarily). If required, the full build log
is available here:
https://people.debian.org/~sanvila/build-logs/202611/
About the archive rebuild: The build was made on virtual machines from AWS,
using sbuild and a reduced chroot with only build-essential packages.
If you cannot reproduce the bug please contact me privately, as I
am willing to provide ssh access to a virtual machine where the bug is
fully reproducible.
If this is really a bug in one of the build-depends, please use
reassign and add an affects on src:osmo-hlr, so that this is still
visible in the BTS web page for this package.
Thanks.
--------------------------------------------------------------------------------
[...]
## ------------- ##
## Test results. ##
## ------------- ##
ERROR: 8 tests were run,
1 failed unexpectedly.
1 test was skipped.
## ------------------------ ##
## Summary of the failures. ##
## ------------------------ ##
Failed tests:
osmo-hlr 1.9.4 test suite test groups:
NUM: FILE-NAME:LINE TEST-GROUP-NAME
KEYWORDS
5: testsuite.at:35 db_upgrade
db_upgrade
Skipped tests:
osmo-hlr 1.9.4 test suite test groups:
NUM: FILE-NAME:LINE TEST-GROUP-NAME
KEYWORDS
9: testsuite.at:62 mslookup_client_mdns
mslookup_client_mdns
## ---------------------- ##
## Detailed failed tests. ##
## ---------------------- ##
# -*- compilation -*-
5. testsuite.at:35: testing db_upgrade ...
./testsuite.at:40: $abs_srcdir/db_upgrade/db_upgrade_test.sh $abs_srcdir/db_upgrade $abs_builddir/db_upgrade
--- expout 2026-11-18 12:34:21.146913991 +0000
+++ /<<PKGBUILDDIR>>/tests/testsuite.dir/at-groups/5/stdout 2026-11-18 12:34:21.362914000 +0000
@@ -66,6 +66,7 @@
subscriber_id|INTEGER|0||0
Table subscriber_apn contents:
+apn|subscriber_id
Table: subscriber_multi_msisdn
name|type|notnull|dflt_value|pk
@@ -73,6 +74,7 @@
subscriber_id|INTEGER|0||0
Table subscriber_multi_msisdn contents:
+msisdn|subscriber_id
Launching osmo-hlr to upgrade db:
osmo-hlr --database $db --db-upgrade --db-check --config-file $srcdir/osmo-hlr.cfg
@@ -125,6 +127,7 @@
vlr|TEXT|1||0
Table ind contents:
+ind|vlr
Table: subscriber
name|type|notnull|dflt_value|pk
@@ -167,6 +170,7 @@
subscriber_id|INTEGER|0||0
Table subscriber_apn contents:
+apn|subscriber_id
Table: subscriber_multi_msisdn
name|type|notnull|dflt_value|pk
@@ -174,6 +178,7 @@
subscriber_id|INTEGER|0||0
Table subscriber_multi_msisdn contents:
+msisdn|subscriber_id
Verify that osmo-hlr can open it:
osmo-hlr --database $db --db-check --config-file $srcdir/osmo-hlr.cfg
5. testsuite.at:35: 5. db_upgrade (testsuite.at:35): FAILED (testsuite.at:40)
## ------------- ##
## ../config.log ##
## ------------- ##
| This file contains any messages produced by compilers while
| running configure, to aid debugging if configure makes a mistake.
|
| It was created by osmo-hlr configure 1.9.4, which was
| generated by GNU Autoconf 2.73. Invocation command line was
|
| $ ./configure --build=x86_64-linux-gnu --prefix=/usr '--includedir=${prefix}/include' '--mandir=${prefix}/share/man' '--infodir=${prefix}/share/info' --sysconfdir=/etc --localstatedir=/var --disable-option-checking --disable-silent-rules '--libdir=${prefix}/lib/x86_64-linux-gnu' --runstatedir=/run --disable-maintainer-mode --disable-dependency-tracking --with-systemdsystemunitdir=no
|
| ## --------- ##
| ## Platform. ##
| ## --------- ##
|
| hostname = sbuild
| uname -m = x86_64
| uname -r = 6.12.117+deb13-cloud-amd64
| uname -s = Linux
| uname -v = #1 SMP PREEMPT_DYNAMIC Debian 6.12.117-1 (2026-11-12)
|
| /usr/bin/uname -p = unknown
| /bin/uname -X = unknown
|
| /bin/arch = x86_64
| /usr/bin/arch -k = unknown
| /usr/convex/getsysinfo = unknown
| /usr/bin/hostinfo = unknown
| /bin/machine = unknown
| /usr/bin/oslevel = unknown
| /bin/universe = unknown
|
| PATH: /usr/local/sbin/
| PATH: /usr/local/bin/
| PATH: /usr/sbin/
| PATH: /usr/bin/
| PATH: /sbin/
| PATH: /bin/
| PATH: /usr/games/
|
|
| ## ----------- ##
| ## Core tests. ##
| ## ----------- ##
|
| configure:2604: looking for aux files: missing install-sh compile config.guess config.sub ltmain.sh
| configure:2617: trying ././
| configure:2646: ././missing found
| configure:2628: ././install-sh found
| configure:2646: ././compile found
| configure:2646: ././config.guess found
| configure:2646: ././config.sub found
| configure:2646: ././ltmain.sh found
| configure:2818: checking build system type
| configure:2834: result: x86_64-pc-linux-gnu
| configure:2854: checking host system type
| configure:2869: result: x86_64-pc-linux-gnu
| configure:2910: checking how to print strings
| configure:2937: result: printf
| configure:3027: checking for gcc
| configure:3060: result: x86_64-linux-gnu-gcc
| configure:3419: checking for C compiler version
| configure:3428: x86_64-linux-gnu-gcc --version >&5
| x86_64-linux-gnu-gcc (Debian 16.2.0-4) 16.2.0
| Copyright (C) 2026 Free Software Foundation, Inc.
| This is free software; see the source for copying conditions. There is NO
| warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
|
| configure:3439: $? = 0
| configure:3428: x86_64-linux-gnu-gcc -v >&5
| Using built-in specs.
| COLLECT_GCC=x86_64-linux-gnu-gcc
| COLLECT_LTO_WRAPPER=/usr/libexec/gcc/x86_64-linux-gnu/16/lto-wrapper
| OFFLOAD_TARGET_NAMES=nvptx-none:amdgcn-amdhsa
| OFFLOAD_TARGET_DEFAULT=1
| Target: x86_64-linux-gnu
| Configured with: ../src/configure -v --with-pkgversion='De [too-long-redacted] n --enable-link-serialization=3
| Thread model: posix
| Supported LTO compression algorithms: zlib zstd
| gcc version 16.2.0 (Debian 16.2.0-4)
| ... rest of stderr output deleted ...
| configure:3439: $? = 0
| configure:3428: x86_64-linux-gnu-gcc -V >&5
| x86_64-linux-gnu-gcc: error: unrecognized command-line option '-V'
| x86_64-linux-gnu-gcc: fatal error: no input files
| compilation terminated.
| configure:3439: $? = 1
| configure:3428: x86_64-linux-gnu-gcc -qversion >&5
| x86_64-linux-gnu-gcc: error: unrecognized command-line option '-qversion'; did you mean '--version'?
| x86_64-linux-gnu-gcc: fatal error: no input files
| compilation terminated.
| configure:3439: $? = 1
| configure:3428: x86_64-linux-gnu-gcc -version >&5
| x86_64-linux-gnu-gcc: error: unrecognized command-line option '-version'
| x86_64-linux-gnu-gcc: fatal error: no input files
| compilation terminated.
| configure:3439: $? = 1
| configure:3459: checking whether the C compiler works
| configure:3481: x86_64-linux-gnu-gcc -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/<<PKGBUILDDIR>>=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -fcf-protection -Wdate-time -D_FORTIFY_SOURCE=2 -Wl,-z,relro -Wl,-z,now conftest.c >&5
| configure:3485: $? = 0
| configure:3536: result: yes
| configure:3540: checking for C compiler default output file name
| configure:3542: result: a.out
| configure:3548: checking for suffix of executables
| configure:3555: x86_64-linux-gnu-gcc -o conftest -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/<<PKGBUILDDIR>>=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -fcf-protection -Wdate-time -D_FORTIFY_SOURCE=2 -Wl,-z,relro -Wl,-z,now conftest.c >&5
| configure:3559: $? = 0
| configure:3583: result:
| configure:3607: checking whether we are cross compiling
| configure:3615: x86_64-linux-gnu-gcc -o conftest -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/<<PKGBUILDDIR>>=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -fcf-protection -Wdate-time -D_FORTIFY_SOURCE=2 -Wl,-z,relro -Wl,-z,now conftest.c >&5
| configure:3619: $? = 0
| configure:3626: ./conftest
| configure:3630: $? = 0
| configure:3645: result: no
| configure:3651: checking for suffix of object files
| configure:3674: x86_64-linux-gnu-gcc -c -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/<<PKGBUILDDIR>>=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -fcf-protection -Wdate-time -D_FORTIFY_SOURCE=2 conftest.c >&5
| configure:3678: $? = 0
| configure:3702: result: o
| configure:3706: checking whether the compiler supports GNU C
| configure:3726: x86_64-linux-gnu-gcc -c -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/<<PKGBUILDDIR>>=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -fcf-protection -Wdate-time -D_FORTIFY_SOURCE=2 conftest.c >&5
| configure:3726: $? = 0
| configure:3738: result: yes
| configure:3749: checking whether x86_64-linux-gnu-gcc accepts -g
| configure:3770: x86_64-linux-gnu-gcc -c -g -Wdate-time -D_FORTIFY_SOURCE=2 conftest.c >&5
| configure:3770: $? = 0
| configure:3817: result: yes
| configure:3837: checking for x86_64-linux-gnu-gcc option to enable C23 features
| configure:3852: x86_64-linux-gnu-gcc -c -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/<<PKGBUILDDIR>>=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -fcf-protection -Wdate-time -D_FORTIFY_SOURCE=2 conftest.c >&5
| configure:3852: $? = 0
| configure:3871: result: none needed
| configure:4044: checking whether x86_64-linux-gnu-gcc understands -c and -o together
| configure:4067: x86_64-linux-gnu-gcc -c conftest.c -o conftest2.o
| configure:4070: $? = 0
| configure:4067: x86_64-linux-gnu-gcc -c conftest.c -o conftest2.o
| configure:4070: $? = 0
| configure:4086: result: yes
| configure:4103: checking for a sed that does not truncate output
| configure:4175: result: /usr/bin/sed
| configure:4193: checking for grep that handles long lines and -e
| configure:4259: result: /usr/bin/grep
| configure:4264: checking for egrep
| configure:4334: result: /usr/bin/grep -E
| configure:4341: checking for fgrep
| configure:4411: result: /usr/bin/grep -F
| configure:4448: checking for ld used by x86_64-linux-gnu-gcc
| configure:4517: result: /usr/bin/x86_64-linux-gnu-ld
| configure:4524: checking if the linker (/usr/bin/x86_64-linux-gnu-ld) is GNU ld
| configure:4541: result: yes
| configure:4553: checking for BSD- or MS-compatible name lister (nm)
| configure:4609: result: /usr/bin/nm -B
| configure:4751: checking the name lister (/usr/bin/nm -B) interface
| configure:4759: x86_64-linux-gnu-gcc -c -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/<<PKGBUILDDIR>>=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -fcf-protection -Wdate-time -D_FORTIFY_SOURCE=2 conftest.c >&5
| configure:4762: /usr/bin/nm -B "conftest.o"
| configure:4765: output
| 0000000000000000 B some_variable
| configure:4773: result: BSD nm
| configure:4776: checking whether ln -s works
| configure:4780: result: yes
| configure:4788: checking the maximum length of command line arguments
| configure:4921: result: 1572864
| configure:4969: checking how to convert x86_64-pc-linux-gnu file names to x86_64-pc-linux-gnu format
| configure:5011: result: func_convert_file_noop
| configure:5018: checking how to convert x86_64-pc-linux-gnu file names to toolchain format
| configure:5040: result: func_convert_file_noop
| configure:5118: checking for /usr/bin/x86_64-linux-gnu-ld option to reload object files
| configure:5127: result: -r
| configure:5160: checking for file
| configure:5181: found /usr/bin/file
| configure:5194: result: file
| configure:5257: checking for objdump
| configure:5278: found /usr/bin/objdump
| configure:5290: result: objdump
| configure:5322: checking how to recognize dependent libraries
| configure:5531: result: pass_all
| configure:5622: checking for dlltool
| configure:5658: result: no
| configure:5688: checking how to associate runtime and link libraries
| configure:5717: result: printf %s\n
| configure:5778: checking for ranlib
| configure:5799: found /usr/bin/ranlib
| configure:5811: result: ranlib
| configure:5888: checking for ar
| configure:5909: found /usr/bin/ar
| configure:5921: result: ar
| configure:5974: checking for archiver @FILE support
| configure:5992: x86_64-linux-gnu-gcc -c -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/<<PKGBUILDDIR>>=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -fcf-protection -Wdate-time -D_FORTIFY_SOURCE=2 conftest.c >&5
| configure:5992: $? = 0
| configure:5996: ar cr libconftest.a @conftest.lst >&5
| configure:5999: $? = 0
| configure:6004: ar cr libconftest.a @conftest.lst >&5
| ar: conftest.o: No such file or directory
| configure:6007: $? = 1
| configure:6020: result: @
| configure:6084: checking for strip
| configure:6105: found /usr/bin/strip
| configure:6117: result: strip
| configure:6195: checking for gawk
| configure:6231: result: no
| configure:6195: checking for mawk
| configure:6216: found /usr/bin/mawk
| configure:6228: result: mawk
| configure:6268: checking command to parse /usr/bin/nm -B output from x86_64-linux-gnu-gcc object
| configure:6424: x86_64-linux-gnu-gcc -c -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/<<PKGBUILDDIR>>=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -fcf-protection -Wdate-time -D_FORTIFY_SOURCE=2 conftest.c >&5
| configure:6427: $? = 0
| configure:6431: /usr/bin/nm -B conftest.o | /usr/bin/sed -n -e 's/^.*[ ]\([ABCDGIRSTW][ABCDGIRSTW]*\)[ ][ ]*\([_A-Za-z][_A-Za-z0-9]*\)$/\1 \2 \2/p' | /usr/bin/sed '/ __gnu_lto/d' > conftest.nm
| configure:6497: x86_64-linux-gnu-gcc -o conftest -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/<<PKGBUILDDIR>>=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -fcf-protection -Wdate-time -D_FORTIFY_SOURCE=2 -Wl,-z,relro -Wl,-z,now conftest.c conftstm.o >&5
| configure:6500: $? = 0
| configure:6539: result: ok
| configure:6586: checking for sysroot
| configure:6620: result: no
| configure:6627: checking for a working dd
| configure:6672: result: /usr/bin/dd
| configure:6676: checking how to truncate binary pipes
| configure:6693: result: /usr/bin/dd bs=4096 count=1
| configure:6830: x86_64-linux-gnu-gcc -c -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/<<PKGBUILDDIR>>=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -fcf-protection -Wdate-time -D_FORTIFY_SOURCE=2 conftest.c >&5
| configure:6833: $? = 0
| configure:7033: checking for mt
| configure:7069: result: no
| configure:7089: checking if : is a manifest tool
| configure:7096: : '-?'
| configure:7105: result: no
| configure:7902: checking for stdio.h
| configure:7902: x86_64-linux-gnu-gcc -c -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/<<PKGBUILDDIR>>=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -fcf-protection -Wdate-time -D_FORTIFY_SOURCE=2 conftest.c >&5
| configure:7902: $? = 0
| configure:7902: result: yes
| configure:7902: checking for stdlib.h
| configure:7902: x86_64-linux-gnu-gcc -c -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/<<PKGBUILDDIR>>=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -fcf-protection -Wdate-time -D_FORTIFY_SOURCE=2 conftest.c >&5
| configure:7902: $? = 0
| configure:7902: result: yes
| configure:7902: checking for string.h
| configure:7902: x86_64-linux-gnu-gcc -c -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/<<PKGBUILDDIR>>=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -fcf-protection -Wdate-time -D_FORTIFY_SOURCE=2 conftest.c >&5
| configure:7902: $? = 0
| configure:7902: result: yes
| configure:7902: checking for inttypes.h
| configure:7902: x86_64-linux-gnu-gcc -c -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/<<PKGBUILDDIR>>=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -fcf-protection -Wdate-time -D_FORTIFY_SOURCE=2 conftest.c >&5
| configure:7902: $? = 0
| configure:7902: result: yes
| configure:7902: checking for stdint.h
| configure:7902: x86_64-linux-gnu-gcc -c -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/<<PKGBUILDDIR>>=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -fcf-protection -Wdate-time -D_FORTIFY_SOURCE=2 conftest.c >&5
| configure:7902: $? = 0
| configure:7902: result: yes
| configure:7902: checking for strings.h
| configure:7902: x86_64-linux-gnu-gcc -c -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/<<PKGBUILDDIR>>=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -fcf-protection -Wdate-time -D_FORTIFY_SOURCE=2 conftest.c >&5
| configure:7902: $? = 0
| configure:7902: result: yes
| configure:7902: checking for sys/stat.h
| configure:7902: x86_64-linux-gnu-gcc -c -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/<<PKGBUILDDIR>>=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -fcf-protection -Wdate-time -D_FORTIFY_SOURCE=2 conftest.c >&5
| configure:7902: $? = 0
| configure:7902: result: yes
| configure:7902: checking for sys/types.h
| configure:7902: x86_64-linux-gnu-gcc -c -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/<<PKGBUILDDIR>>=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -fcf-protection -Wdate-time -D_FORTIFY_SOURCE=2 conftest.c >&5
| configure:7902: $? = 0
| configure:7902: result: yes
| configure:7902: checking for unistd.h
| configure:7902: x86_64-linux-gnu-gcc -c -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/<<PKGBUILDDIR>>=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -fcf-protection -Wdate-time -D_FORTIFY_SOURCE=2 conftest.c >&5
| configure:7902: $? = 0
| configure:7902: result: yes
| configure:7927: checking for dlfcn.h
| configure:7927: x86_64-linux-gnu-gcc -c -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/<<PKGBUILDDIR>>=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -fcf-protection -Wdate-time -D_FORTIFY_SOURCE=2 conftest.c >&5
| configure:7927: $? = 0
| configure:7927: result: yes
| configure:8213: checking which variant of shared library versioning to provide
| configure:8216: result: (default) aix
| configure:8284: checking for objdir
| configure:8301: result: .libs
| configure:8567: checking if x86_64-linux-gnu-gcc supports -fno-rtti -fno-exceptions
| configure:8586: x86_64-linux-gnu-gcc -c -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/<<PKGBUILDDIR>>=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -fcf-protection -Wdate-time -D_FORTIFY_SOURCE=2 -fno-rtti -fno-exceptions conftest.c >&5
| cc1: warning: command-line option '-fno-rtti' is valid for C++/D/ObjC++ but not for C
| configure:8590: $? = 0
| configure:8604: result: no
| configure:8989: checking for x86_64-linux-gnu-gcc option to produce PIC
| configure:8998: result: -fPIC -DPIC
| configure:9006: checking if x86_64-linux-gnu-gcc PIC flag -fPIC -DPIC works
| configure:9025: x86_64-linux-gnu-gcc -c -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/<<PKGBUILDDIR>>=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -fcf-protection -Wdate-time -D_FORTIFY_SOURCE=2 -fPIC -DPIC -DPIC conftest.c >&5
| configure:9029: $? = 0
| configure:9043: result: yes
| configure:9072: checking if x86_64-linux-gnu-gcc static flag -static works
| configure:9102: result: yes
| configure:9117: checking if x86_64-linux-gnu-gcc supports -c -o file.o
| configure:9139: x86_64-linux-gnu-gcc -c -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/<<PKGBUILDDIR>>=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -fcf-protection -Wdate-time -D_FORTIFY_SOURCE=2 -o out/conftest2.o conftest.c >&5
| configure:9143: $? = 0
| configure:9166: result: yes
| configure:9174: checking if x86_64-linux-gnu-gcc supports -c -o file.o
| configure:9223: result: yes
| configure:9256: checking whether the x86_64-linux-gnu-gcc linker (/usr/bin/x86_64-linux-gnu-ld -m elf_x86_64) supports shared libraries
| configure:10548: result: yes
| configure:10585: checking whether -lc should be explicitly linked in
| configure:10594: x86_64-linux-gnu-gcc -c -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/<<PKGBUILDDIR>>=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -fcf-protection -Wdate-time -D_FORTIFY_SOURCE=2 conftest.c >&5
| configure:10597: $? = 0
| configure:10612: x86_64-linux-gnu-gcc -shared -fPIC -DPIC conftest.o -v -Wl,-soname -Wl,conftest -o conftest 2\>\&1 \| /usr/bin/grep -lc \>/dev/null 2\>\&1
| configure:10615: $? = 0
| configure:10630: result: no
| configure:10790: checking dynamic linker characteristics
| configure:11421: x86_64-linux-gnu-gcc -o conftest -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/<<PKGBUILDDIR>>=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -fcf-protection -Wdate-time -D_FORTIFY_SOURCE=2 -Wl,-z,relro -Wl,-z,now -Wl,-rpath -Wl,/foo conftest.c >&5
| configure:11421: $? = 0
| configure:12207: result: GNU/Linux ld.so
| configure:12329: checking how to hardcode library paths into programs
| configure:12354: result: immediate
| configure:12954: checking whether stripping libraries is possible
| configure:12963: result: yes
| configure:13005: checking if libtool supports shared libraries
| configure:13007: result: yes
| configure:13010: checking whether to build shared libraries
| configure:13035: result: yes
| configure:13038: checking whether to build static libraries
| configure:13042: result: yes
| configure:13104: checking for a BSD-compatible install
| configure:13178: result: /usr/bin/install -c
| configure:13189: checking whether sleep supports fractional seconds
| configure:13205: result: yes
| configure:13208: checking filesystem timestamp resolution
| configure:13343: result: 0.01
| configure:13348: checking whether build environment is sane
| configure:13393: result: yes
| configure:13560: checking for a race-free mkdir -p
| configure:13603: result: /usr/bin/mkdir -p
| configure:13606: checking whether make sets $(MAKE)
| configure:13630: result: yes
| configure:13652: checking whether make supports the include directive
| configure:13667: make -f confmf.GNU && cat confinc.out
| make[2]: Entering directory '/<<PKGBUILDDIR>>'
| make[2]: Leaving directory '/<<PKGBUILDDIR>>'
| this is the am__doit target
| configure:13670: $? = 0
| configure:13689: result: yes (GNU style)
| configure:13720: checking whether make supports nested variables
| configure:13739: result: yes
| configure:13753: checking xargs -n works
| configure:13769: result: yes
| configure:13859: checking whether UID '995' is supported by ustar format
| configure:13865: result: yes
| configure:13872: checking whether GID '995' is supported by ustar format
| configure:13878: result: yes
| configure:13886: checking how to create a ustar tar archive
| configure:13898: tar --version | grep GNU >/dev/null
| configure:13901: $? = 0
| configure:13942: tardir=conftest.dir && eval tar --format=ustar -chf - "$tardir" >conftest.tar
| configure:13945: $? = 0
| configure:13949: tar -xf - <conftest.tar
| configure:13952: $? = 0
| configure:13954: cat conftest.dir/file
| GrepMe
| configure:13957: $? = 0
| configure:13972: result: gnutar
| configure:13982: checking dependency style of x86_64-linux-gnu-gcc
| configure:14095: result: none
| configure:14143: checking whether make sets $(MAKE)
| configure:14167: result: yes
| configure:14231: checking for gcc
| configure:14264: result: x86_64-linux-gnu-gcc
| configure:14623: checking for C compiler version
| configure:14632: x86_64-linux-gnu-gcc --version >&5
| x86_64-linux-gnu-gcc (Debian 16.2.0-4) 16.2.0
| Copyright (C) 2026 Free Software Foundation, Inc.
| This is free software; see the source for copying conditions. There is NO
| warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
|
| configure:14643: $? = 0
| configure:14632: x86_64-linux-gnu-gcc -v >&5
| Using built-in specs.
| COLLECT_GCC=x86_64-linux-gnu-gcc
| COLLECT_LTO_WRAPPER=/usr/libexec/gcc/x86_64-linux-gnu/16/lto-wrapper
| OFFLOAD_TARGET_NAMES=nvptx-none:amdgcn-amdhsa
| OFFLOAD_TARGET_DEFAULT=1
| Target: x86_64-linux-gnu
| Configured with: ../src/configure -v --with-pkgversion='De [too-long-redacted] n --enable-link-serialization=3
| Thread model: posix
| Supported LTO compression algorithms: zlib zstd
| gcc version 16.2.0 (Debian 16.2.0-4)
| ... rest of stderr output deleted ...
| configure:14643: $? = 0
| configure:14632: x86_64-linux-gnu-gcc -V >&5
| x86_64-linux-gnu-gcc: error: unrecognized command-line option '-V'
| x86_64-linux-gnu-gcc: fatal error: no input files
| compilation terminated.
| configure:14643: $? = 1
| configure:14632: x86_64-linux-gnu-gcc -qversion >&5
| x86_64-linux-gnu-gcc: error: unrecognized command-line option '-qversion'; did you mean '--version'?
| x86_64-linux-gnu-gcc: fatal error: no input files
| compilation terminated.
| configure:14643: $? = 1
| configure:14632: x86_64-linux-gnu-gcc -version >&5
| x86_64-linux-gnu-gcc: error: unrecognized command-line option '-version'
| x86_64-linux-gnu-gcc: fatal error: no input files
| compilation terminated.
| configure:14643: $? = 1
| configure:14647: checking whether the compiler supports GNU C
| configure:14679: result: yes
| configure:14690: checking whether x86_64-linux-gnu-gcc accepts -g
| configure:14758: result: yes
| configure:14778: checking for x86_64-linux-gnu-gcc option to enable C23 features
| configure:14812: result: none needed
| configure:14985: checking whether x86_64-linux-gnu-gcc understands -c and -o together
| configure:15027: result: yes
| configure:15110: checking for pkg-config
| configure:15133: found /usr/bin/pkg-config
| configure:15146: result: /usr/bin/pkg-config
| configure:15232: checking for pkg-config
| configure:15255: found /usr/bin/pkg-config
| configure:15268: result: /usr/bin/pkg-config
| configure:15293: checking pkg-config is at least version 0.20
| configure:15296: result: yes
| configure:15360: checking for help2man
| configure:15383: found /usr/bin/help2man
| configure:15396: result: /usr/bin/help2man
| configure:15421: checking for talloc >= 2.0.1
| configure:15428: $PKG_CONFIG --exists --print-errors "talloc >= 2.0.1"
| configure:15431: $? = 0
| configure:15445: $PKG_CONFIG --exists --print-errors "talloc >= 2.0.1"
| configure:15448: $? = 0
| configure:15506: result: yes
| configure:15513: checking for libosmocore >= 1.11.0
| configure:15520: $PKG_CONFIG --exists --print-errors "libosmocore >= 1.11.0"
| configure:15523: $? = 0
| configure:15537: $PKG_CONFIG --exists --print-errors "libosmocore >= 1.11.0"
| configure:15540: $? = 0
| configure:15598: result: yes
| configure:15604: checking for libosmogsm >= 1.11.0
| configure:15611: $PKG_CONFIG --exists --print-errors "libosmogsm >= 1.11.0"
| configure:15614: $? = 0
| configure:15628: $PKG_CONFIG --exists --print-errors "libosmogsm >= 1.11.0"
| configure:15631: $? = 0
| configure:15689: result: yes
| configure:15695: checking for libosmovty >= 1.11.0
| configure:15702: $PKG_CONFIG --exists --print-errors "libosmovty >= 1.11.0"
| configure:15705: $? = 0
| configure:15719: $PKG_CONFIG --exists --print-errors "libosmovty >= 1.11.0"
| configure:15722: $? = 0
| configure:15780: result: yes
| configure:15786: checking for libosmoctrl >= 1.11.0
| configure:15793: $PKG_CONFIG --exists --print-errors "libosmoctrl >= 1.11.0"
| configure:15796: $? = 0
| configure:15810: $PKG_CONFIG --exists --print-errors "libosmoctrl >= 1.11.0"
| configure:15813: $? = 0
| configure:15871: result: yes
| configure:15877: checking for libosmoabis >= 2.0.0
| configure:15884: $PKG_CONFIG --exists --print-errors "libosmoabis >= 2.0.0"
| configure:15887: $? = 0
| configure:15901: $PKG_CONFIG --exists --print-errors "libosmoabis >= 2.0.0"
| configure:15904: $? = 0
| configure:15962: result: yes
| configure:15969: checking for sqlite3
| configure:15976: $PKG_CONFIG --exists --print-errors "sqlite3"
| configure:15979: $? = 0
| configure:15993: $PKG_CONFIG --exists --print-errors "sqlite3"
| configure:15996: $? = 0
| configure:16054: result: yes
| configure:16064: checking for egrep
| configure:16134: result: /usr/bin/grep -E
| configure:16266: checking whether to use talloc for SQLite3
| configure:16268: result: no
| configure:16727: checking whether to enable VTY/CTRL tests
| configure:16729: result: no
| configure:16750: checking whether to enable mslookup_client_mdns_test
| configure:16752: result: no
| configure:16856: result: CFLAGS="-g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/<<PKGBUILDDIR>>=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -fcf-protection -std=gnu11"
| configure:16858: result: CPPFLAGS="-Wdate-time -D_FORTIFY_SOURCE=2"
| configure:16969: checking that generated files are newer than configure
| configure:16975: result: done
| configure:17038: creating ./config.status
|
| ## ---------------------- ##
| ## Running config.status. ##
| ## ---------------------- ##
|
| This file was extended by osmo-hlr config.status 1.9.4, which was
| generated by GNU Autoconf 2.73. Invocation command line was
|
| CONFIG_FILES =
| CONFIG_HEADERS =
| CONFIG_LINKS =
| CONFIG_COMMANDS =
| $ ./config.status
|
| on sbuild
|
| config.status:1063: creating Makefile
| config.status:1063: creating doc/Makefile
| config.status:1063: creating doc/examples/Makefile
| config.status:1063: creating src/Makefile
| config.status:1063: creating src/gsupclient/Makefile
| config.status:1063: creating src/mslookup/Makefile
| config.status:1063: creating include/Makefile
| config.status:1063: creating include/osmocom/Makefile
| config.status:1063: creating include/osmocom/hlr/Makefile
| config.status:1063: creating include/osmocom/mslookup/Makefile
| config.status:1063: creating libosmo-gsup-client.pc
| config.status:1063: creating libosmo-mslookup.pc
| config.status:1063: creating sql/Makefile
| config.status:1063: creating contrib/Makefile
| config.status:1063: creating contrib/systemd/Makefile
| config.status:1063: creating contrib/dgsm/Makefile
| config.status:1063: creating tests/Makefile
| config.status:1063: creating tests/auc/Makefile
| config.status:1063: creating tests/auc/gen_ts_55_205_test_sets/Makefile
| config.status:1063: creating tests/gsup/Makefile
| config.status:1063: creating tests/db/Makefile
| config.status:1063: creating tests/db_upgrade/Makefile
| config.status:1063: creating tests/mslookup/Makefile
| config.status:1235: executing libtool commands
| config.status:1235: executing depfiles commands
| config.status:1235: executing tests/atconfig commands
|
| ## ---------------- ##
| ## Cache variables. ##
| ## ---------------- ##
|
| ac_cv_build=x86_64-pc-linux-gnu
| ac_cv_c_compiler_gnu=yes
| ac_cv_env_CC_set=set
| ac_cv_env_CC_value=x86_64-linux-gnu-gcc
| ac_cv_env_CFLAGS_set=set
| ac_cv_env_CFLAGS_value='-g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/<<PKGBUILDDIR>>=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -fcf-protection'
| ac_cv_env_CPPFLAGS_set=set
| ac_cv_env_CPPFLAGS_value='-Wdate-time -D_FORTIFY_SOURCE=2'
| ac_cv_env_LDFLAGS_set=set
| ac_cv_env_LDFLAGS_value='-Wl,-z,relro -Wl,-z,now'
| ac_cv_env_LIBOSMOABIS_CFLAGS_set=
| ac_cv_env_LIBOSMOABIS_CFLAGS_value=
| ac_cv_env_LIBOSMOABIS_LIBS_set=
| ac_cv_env_LIBOSMOABIS_LIBS_value=
| ac_cv_env_LIBOSMOCORE_CFLAGS_set=
| ac_cv_env_LIBOSMOCORE_CFLAGS_value=
| ac_cv_env_LIBOSMOCORE_LIBS_set=
| ac_cv_env_LIBOSMOCORE_LIBS_value=
| ac_cv_env_LIBOSMOCTRL_CFLAGS_set=
| ac_cv_env_LIBOSMOCTRL_CFLAGS_value=
| ac_cv_env_LIBOSMOCTRL_LIBS_set=
| ac_cv_env_LIBOSMOCTRL_LIBS_value=
| ac_cv_env_LIBOSMOGSM_CFLAGS_set=
| ac_cv_env_LIBOSMOGSM_CFLAGS_value=
| ac_cv_env_LIBOSMOGSM_LIBS_set=
| ac_cv_env_LIBOSMOGSM_LIBS_value=
| ac_cv_env_LIBOSMOVTY_CFLAGS_set=
| ac_cv_env_LIBOSMOVTY_CFLAGS_value=
| ac_cv_env_LIBOSMOVTY_LIBS_set=
| ac_cv_env_LIBOSMOVTY_LIBS_value=
| ac_cv_env_LIBS_set=
| ac_cv_env_LIBS_value=
| ac_cv_env_LT_SYS_LIBRARY_PATH_set=
| ac_cv_env_LT_SYS_LIBRARY_PATH_value=
| ac_cv_env_OSMO_GSM_MANUALS_DIR_set=
| ac_cv_env_OSMO_GSM_MANUALS_DIR_value=
| ac_cv_env_PKG_CONFIG_LIBDIR_set=
| ac_cv_env_PKG_CONFIG_LIBDIR_value=
| ac_cv_env_PKG_CONFIG_PATH_set=
| ac_cv_env_PKG_CONFIG_PATH_value=
| ac_cv_env_PKG_CONFIG_set=
| ac_cv_env_PKG_CONFIG_value=
| ac_cv_env_PYTHON_set=
| ac_cv_env_PYTHON_value=
| ac_cv_env_SQLITE3_CFLAGS_set=
| ac_cv_env_SQLITE3_CFLAGS_value=
| ac_cv_env_SQLITE3_LIBS_set=
| ac_cv_env_SQLITE3_LIBS_value=
| ac_cv_env_TALLOC_CFLAGS_set=
| ac_cv_env_TALLOC_CFLAGS_value=
| ac_cv_env_TALLOC_LIBS_set=
| ac_cv_env_TALLOC_LIBS_value=
| ac_cv_env_build_alias_set=set
| ac_cv_env_build_alias_value=x86_64-linux-gnu
| ac_cv_env_host_alias_set=
| ac_cv_env_host_alias_value=
| ac_cv_env_target_alias_set=
| ac_cv_env_target_alias_value=
| ac_cv_header_dlfcn_h=yes
| ac_cv_header_inttypes_h=yes
| ac_cv_header_stdint_h=yes
| ac_cv_header_stdio_h=yes
| ac_cv_header_stdlib_h=yes
| ac_cv_header_string_h=yes
| ac_cv_header_strings_h=yes
| ac_cv_header_sys_stat_h=yes
| ac_cv_header_sys_types_h=yes
| ac_cv_header_unistd_h=yes
| ac_cv_host=x86_64-pc-linux-gnu
| ac_cv_objext=o
| ac_cv_path_EGREP='/usr/bin/grep -E'
| ac_cv_path_EGREP_TRADITIONAL='/usr/bin/grep -E'
| ac_cv_path_FGREP='/usr/bin/grep -F'
| ac_cv_path_GREP=/usr/bin/grep
| ac_cv_path_SED=/usr/bin/sed
| ac_cv_path_ac_pt_HELP2MAN=/usr/bin/help2man
| ac_cv_path_ac_pt_PKG_CONFIG=/usr/bin/pkg-config
| ac_cv_path_ac_pt_PKG_CONFIG_INSTALLED=/usr/bin/pkg-config
| ac_cv_path_install='/usr/bin/install -c'
| ac_cv_path_lt_DD=/usr/bin/dd
| ac_cv_path_mkdir=/usr/bin/mkdir
| ac_cv_prog_AWK=mawk
| ac_cv_prog_FILECMD=file
| ac_cv_prog_ac_ct_AR=ar
| ac_cv_prog_ac_ct_CC=x86_64-linux-gnu-gcc
| ac_cv_prog_ac_ct_OBJDUMP=objdump
| ac_cv_prog_ac_ct_RANLIB=ranlib
| ac_cv_prog_ac_ct_STRIP=strip
| ac_cv_prog_cc_c23=
| ac_cv_prog_cc_g=yes
| ac_cv_prog_cc_stdc=
| ac_cv_prog_make_make_set=yes
| am_cv_CC_dependencies_compiler_type=none
| am_cv_filesystem_timestamp_resolution=0.01
| am_cv_make_support_nested_variables=yes
| am_cv_prog_cc_c_o=yes
| am_cv_prog_tar_ustar=gnutar
| am_cv_sleep_fractional_seconds=yes
| am_cv_xargs_n_works=yes
| lt_cv_ar_at_file=@
| lt_cv_archive_cmds_need_lc=no
| lt_cv_deplibs_check_method=pass_all
| lt_cv_file_magic_cmd='$MAGIC_CMD'
| lt_cv_file_magic_test_file=
| lt_cv_ld_reload_flag=-r
| lt_cv_nm_interface='BSD nm'
| lt_cv_objdir=.libs
| lt_cv_path_LD=/usr/bin/x86_64-linux-gnu-ld
| lt_cv_path_NM='/usr/bin/nm -B'
| lt_cv_path_manifest_tool=no
| lt_cv_prog_compiler_c_o=yes
| lt_cv_prog_compiler_pic='-fPIC -DPIC'
| lt_cv_prog_compiler_pic_works=yes
| lt_cv_prog_compiler_rtti_exceptions=no
| lt_cv_prog_compiler_static_works=yes
| lt_cv_prog_gnu_ld=yes
| lt_cv_sharedlib_from_linklib_cmd='printf %s\n'
| lt_cv_shlibpath_overrides_runpath=yes
| lt_cv_sys_global_symbol_pipe='/usr/bin/sed -n -e '\''s/^.*[ ]\([ABCDGIRSTW][ABCDGIRSTW]*\)[ ][ ]*\([_A-Za-z][_A-Za-z0-9]*\)$/\1 \2 \2/p'\'' | /usr/bin/sed '\''/ __gnu_lto/d'\'''
| lt_cv_sys_global_symbol_to_c_name_address='/usr/bin/sed -n -e '\''s/^: \(.*\) .*$/ {"\1", (void *) 0},/p'\'' -e '\''s/^[ABCDGIRSTW][ABCDGIRSTW]* .* \([a-zA-Z_][a-zA-Z0-9_]*\)$/ {"\1", (void *) \&\1},/p'\'''
| lt_cv_sys_global_symbol_to_c_name_address_lib_prefix='/usr/bin/sed -n -e '\''s/^: \(.*\) .*$/ {"\1", (void *) 0},/p'\'' -e '\''s/^[ABCDGIRSTW][ABCDGIRSTW]* .* \(lib[a-zA-Z_][a-zA-Z0-9_]*\)$/ {"\1", (void *) \&\1},/p'\'' -e '\''s/^[ABCDGIRSTW][ABCDGIRSTW]* .* \([a-zA-Z_][a-zA-Z0-9_]*\)$/ {"lib\1", (void *) \&\1},/p'\'''
| lt_cv_sys_global_symbol_to_cdecl='/usr/bin/sed -n -e '\''s/^T .* \([a-zA-Z_][a-zA-Z0-9_]*\)$/extern int \1();/p'\'' -e '\''s/^[ABCDGIRSTW][ABCDGIRSTW]* .* \([a-zA-Z_][a-zA-Z0-9_]*\)$/extern char \1;/p'\'''
| lt_cv_sys_global_symbol_to_import=
| lt_cv_sys_max_cmd_len=1572864
| lt_cv_to_host_file_cmd=func_convert_file_noop
| lt_cv_to_tool_file_cmd=func_convert_file_noop
| lt_cv_truncate_bin='/usr/bin/dd bs=4096 count=1'
| pkg_cv_LIBOSMOABIS_CFLAGS='-I/usr/include/ -pthread'
| pkg_cv_LIBOSMOABIS_LIBS='-losmoabis -losmocore -ltalloc -lmnl'
| pkg_cv_LIBOSMOCORE_CFLAGS='-I/usr/include/ -pthread'
| pkg_cv_LIBOSMOCORE_LIBS='-losmocore -ltalloc -lmnl'
| pkg_cv_LIBOSMOCTRL_CFLAGS='-I/usr/include/ -pthread'
| pkg_cv_LIBOSMOCTRL_LIBS='-losmoctrl -losmogsm -losmoisdn -losmocore -ltalloc -lmnl'
| pkg_cv_LIBOSMOGSM_CFLAGS='-I/usr/include/ -pthread'
| pkg_cv_LIBOSMOGSM_LIBS='-losmogsm -losmoisdn -losmocore -ltalloc -lmnl'
| pkg_cv_LIBOSMOVTY_CFLAGS='-I/usr/include/ -pthread'
| pkg_cv_LIBOSMOVTY_LIBS='-losmovty -losmocore -ltalloc -lmnl'
| pkg_cv_SQLITE3_CFLAGS=
| pkg_cv_SQLITE3_LIBS=-lsqlite3
| pkg_cv_TALLOC_CFLAGS=
| pkg_cv_TALLOC_LIBS=-ltalloc
|
| ## ----------------- ##
| ## Output variables. ##
| ## ----------------- ##
|
| ACLOCAL='${SHELL} '\''/<<PKGBUILDDIR>>/missing'\'' aclocal-1.19'
| AMDEPBACKSLASH=''
| AMDEP_FALSE=''
| AMDEP_TRUE='#'
| AMTAR='$${TAR-tar}'
| AM_BACKSLASH='\'
| AM_DEFAULT_V='$(AM_DEFAULT_VERBOSITY)'
| AM_DEFAULT_VERBOSITY='1'
| AM_V='$(V)'
| AR='ar'
| AUTOCONF='${SHELL} '\''/<<PKGBUILDDIR>>/missing'\'' autoconf'
| AUTOHEADER='${SHELL} '\''/<<PKGBUILDDIR>>/missing'\'' autoheader'
| AUTOMAKE='${SHELL} '\''/<<PKGBUILDDIR>>/missing'\'' automake-1.19'
| AWK='mawk'
| BUILD_MANUALS_FALSE=''
| BUILD_MANUALS_TRUE='#'
| CC='x86_64-linux-gnu-gcc'
| CCDEPMODE='depmode=none'
| CFLAGS='-g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/<<PKGBUILDDIR>>=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -fcf-protection -std=gnu11'
| CPPFLAGS='-Wdate-time -D_FORTIFY_SOURCE=2'
| CSCOPE='cscope'
| CTAGS='ctags'
| CYGPATH_W='echo'
| DB_SQLITE_DEBUG_FALSE=''
| DB_SQLITE_DEBUG_TRUE='#'
| DEFS='-DPACKAGE_NAME=\"osmo-hlr\" -DPACKAGE_TARNAME=\"osmo-hlr\" -DPACKAGE_VERSION=\"1.9.4\" -DPACKAGE_STRING=\"osmo-hlr\ 1.9.4\" -DPACKAGE_BUGREPORT=\"openbsc@lists.osmocom.org\" -DPACKAGE_URL=\"\" -DHAVE_STDIO_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -DHAVE_STRINGS_H=1 -DHAVE_SYS_STAT_H=1 -DHAVE_SYS_TYPES_H=1 -DHAVE_UNISTD_H=1 -DSTDC_HEADERS=1 -DHAVE_DLFCN_H=1 -DLT_OBJDIR=\".libs/\" -DPACKAGE=\"osmo-hlr\" -DVERSION=\"1.9.4\"'
| DEPDIR='.deps'
| DLLTOOL='false'
| DSYMUTIL=''
| DUMPBIN=''
| ECHO_C=''
| ECHO_N='-n'
| ECHO_T=''
| EGREP='/usr/bin/grep -E'
| ENABLE_EXT_TESTS_FALSE=''
| ENABLE_EXT_TESTS_TRUE='#'
| ENABLE_MSLOOKUP_CLIENT_MDNS_TEST_FALSE=''
| ENABLE_MSLOOKUP_CLIENT_MDNS_TEST_TRUE='#'
| ETAGS='etags'
| EXEEXT=''
| FGREP='/usr/bin/grep -F'
| FILECMD='file'
| GREP='/usr/bin/grep'
| HAVE_SYSTEMD_FALSE=''
| HAVE_SYSTEMD_TRUE='#'
| HELP2MAN='/usr/bin/help2man'
| INSTALL_DATA='${INSTALL} -m 644'
| INSTALL_PROGRAM='${INSTALL}'
| INSTALL_SCRIPT='${INSTALL}'
| INSTALL_STRIP_PROGRAM='$(install_sh) -c -s'
| LD='/usr/bin/x86_64-linux-gnu-ld -m elf_x86_64'
| LDFLAGS='-Wl,-z,relro -Wl,-z,now'
| LIBOBJS=''
| LIBOSMOABIS_CFLAGS='-I/usr/include/ -pthread'
| LIBOSMOABIS_LIBS='-losmoabis -losmocore -ltalloc -lmnl'
| LIBOSMOCORE_CFLAGS='-I/usr/include/ -pthread'
| LIBOSMOCORE_LIBS='-losmocore -ltalloc -lmnl'
| LIBOSMOCTRL_CFLAGS='-I/usr/include/ -pthread'
| LIBOSMOCTRL_LIBS='-losmoctrl -losmogsm -losmoisdn -losmocore -ltalloc -lmnl'
| LIBOSMOGSM_CFLAGS='-I/usr/include/ -pthread'
| LIBOSMOGSM_LIBS='-losmogsm -losmoisdn -losmocore -ltalloc -lmnl'
| LIBOSMOVTY_CFLAGS='-I/usr/include/ -pthread'
| LIBOSMOVTY_LIBS='-losmovty -losmocore -ltalloc -lmnl'
| LIBS=''
| LIBTOOL='$(SHELL) $(top_builddir)/libtool'
| LIPO=''
| LN_S='ln -s'
| LTLIBOBJS=''
| LT_SYS_LIBRARY_PATH=''
| MAKEINFO='${SHELL} '\''/<<PKGBUILDDIR>>/missing'\'' makeinfo'
| MANIFEST_TOOL=':'
| MKDIR_P='/usr/bin/mkdir -p'
| NM='/usr/bin/nm -B'
| NMEDIT=''
| OBJDUMP='objdump'
| OBJEXT='o'
| OSMOTESTEXT_CHECK=''
| OSMO_GSM_MANUALS_DIR=''
| OTOOL64=''
| OTOOL=''
| PACKAGE='osmo-hlr'
| PACKAGE_BUGREPORT='openbsc@lists.osmocom.org'
| PACKAGE_NAME='osmo-hlr'
| PACKAGE_STRING='osmo-hlr 1.9.4'
| PACKAGE_TARNAME='osmo-hlr'
| PACKAGE_URL=''
| PACKAGE_VERSION='1.9.4'
| PATH_SEPARATOR=':'
| PKG_CONFIG='/usr/bin/pkg-config'
| PKG_CONFIG_INSTALLED='/usr/bin/pkg-config'
| PKG_CONFIG_LIBDIR=''
| PKG_CONFIG_PATH=''
| PYTHON=''
| PYTHON_EXEC_PREFIX=''
| PYTHON_PLATFORM=''
| PYTHON_PREFIX=''
| PYTHON_VERSION=''
| RANLIB='ranlib'
| RELMAKE='-include osmo-release.mk'
| SED='/usr/bin/sed'
| SET_MAKE=''
| SHELL='/bin/bash'
| SQLITE3_CFLAGS=''
| SQLITE3_LIBS='-lsqlite3'
| STRIP='strip'
| TALLOC_CFLAGS=''
| TALLOC_LIBS='-ltalloc'
| VERSION='1.9.4'
| ac_ct_AR='ar'
| ac_ct_CC='x86_64-linux-gnu-gcc'
| ac_ct_DUMPBIN=''
| am__EXEEXT_FALSE=''
| am__EXEEXT_TRUE='#'
| am__fastdepCC_FALSE=''
| am__fastdepCC_TRUE='#'
| am__include='include'
| am__isrc=''
| am__leading_dot='.'
| am__nodep=''
| am__quote=''
| am__rm_f_notfound=''
| am__tar='tar --format=ustar -chf - "$$tardir"'
| am__tar_ignore_stderr='no'
| am__untar='tar -xf -'
| am__xargs_n='xargs -n'
| bindir='${exec_prefix}/bin'
| build='x86_64-pc-linux-gnu'
| build_alias='x86_64-linux-gnu'
| build_cpu='x86_64'
| build_os='linux-gnu'
| build_vendor='pc'
| datadir='${datarootdir}'
| datarootdir='${prefix}/share'
| docdir='${datarootdir}/doc/${PACKAGE_TARNAME}'
| dvidir='${docdir}'
| exec_prefix='${prefix}'
| host='x86_64-pc-linux-gnu'
| host_alias=''
| host_cpu='x86_64'
| host_os='linux-gnu'
| host_vendor='pc'
| htmldir='${docdir}'
| includedir='${prefix}/include'
| infodir='${prefix}/share/info'
| install_sh='${SHELL} /<<PKGBUILDDIR>>/install-sh'
| libdir='${prefix}/lib/x86_64-linux-gnu'
| libexecdir='${exec_prefix}/libexec'
| localedir='${datarootdir}/locale'
| localstatedir='/var'
| mandir='${prefix}/share/man'
| mkdir_p='$(MKDIR_P)'
| oldincludedir='/usr/include'
| pdfdir='${docdir}'
| pkgpyexecdir=''
| pkgpythondir=''
| prefix='/usr'
| program_transform_name='s,x,x,'
| psdir='${docdir}'
| pyexecdir=''
| pythondir=''
| runstatedir='/run'
| sbindir='${exec_prefix}/sbin'
| sharedstatedir='${prefix}/com'
| sysconfdir='/etc'
| systemdsystemunitdir=''
| target_alias=''
|
| ## ----------- ##
| ## confdefs.h. ##
| ## ----------- ##
|
| /* confdefs.h */
| #define PACKAGE_NAME "osmo-hlr"
| #define PACKAGE_TARNAME "osmo-hlr"
| #define PACKAGE_VERSION "1.9.4"
| #define PACKAGE_STRING "osmo-hlr 1.9.4"
| #define PACKAGE_BUGREPORT "openbsc@lists.osmocom.org"
| #define PACKAGE_URL ""
| #define HAVE_STDIO_H 1
| #define HAVE_STDLIB_H 1
| #define HAVE_STRING_H 1
| #define HAVE_INTTYPES_H 1
| #define HAVE_STDINT_H 1
| #define HAVE_STRINGS_H 1
| #define HAVE_SYS_STAT_H 1
| #define HAVE_SYS_TYPES_H 1
| #define HAVE_UNISTD_H 1
| #define STDC_HEADERS 1
| #define HAVE_DLFCN_H 1
| #define LT_OBJDIR ".libs/"
| #define PACKAGE "osmo-hlr"
| #define VERSION "1.9.4"
|
| configure: exit
make[1]: *** [debian/rules:17: override_dh_auto_test] Error 1
make[1]: Leaving directory '/<<PKGBUILDDIR>>'
make: *** [debian/rules:9: binary] Error 2
dpkg-buildpackage: error: debian/rules binary subprocess failed with exit status 2
--------------------------------------------------------------------------------