After reporting a previous bug, nothing still works.
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.0.0-1-amd64 (Debian 3.0.0-3)
(ben@decadent.org.uk) (gcc version 4.5.3 (Debian 4.5.3-8) ) #1 SMP Sat Aug 27
16:21:11 UTC 2011
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.0.0-1-amd64
root=UUID=2c84c000-f92f-4dc5-a4fa-f7c80fe5b5e1 ro quiet
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
[ 0.000000] BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e6000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000bffb0000 (usable)
[ 0.000000] BIOS-e820: 00000000bffb0000 - 00000000bffbe000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000bffbe000 - 00000000bffe0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bffe0000 - 00000000c0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff700000 - 0000000100000000 (reserved)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI present.
[ 0.000000] DMI: BIOSTAR Group A770E3/A770E3, BIOS 080014 11/19/2009
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable)
==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0xbffb0 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back
[ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] found SMP MP-table at [ffff8800000ff780] ff780
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] Base memory trampoline at [ffff88000009a000] 9a000 size 20480
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] init_memory_mapping: 0000000000000000-00000000bffb0000
[ 0.000000] 0000000000 - 0080000000 page 1G
[ 0.000000] 0080000000 - 00bfe00000 page 2M
[ 0.000000] 00bfe00000 - 00bffb0000 page 4k
[ 0.000000] kernel direct mapping tables up to bffb0000 @ bffad000-bffb0000
[ 0.000000] RAMDISK: 37b44000 - 37d9a000
[ 0.000000] ACPI: RSDP 00000000000fb210 00014 (v00 ACPIAM)
[ 0.000000] ACPI: RSDT 00000000bffb0000 0003C (v01 111909 RSDT2102 20091119
MSFT 00000097)
[ 0.000000] ACPI: FACP 00000000bffb0200 00084 (v02 111909 FACP2102 20091119
MSFT 00000097)
[ 0.000000] ACPI: DSDT 00000000bffb0440 09681 (v01 78XAD 78XADB19 00000004
INTL 20051117)
[ 0.000000] ACPI: FACS 00000000bffbe000 00040
[ 0.000000] ACPI: APIC 00000000bffb0390 0006C (v01 111909 APIC2102 20091119
MSFT 00000097)
[ 0.000000] ACPI: MCFG 00000000bffb0400 0003C (v01 111909 OEMMCFG 20091119
MSFT 00000097)
[ 0.000000] ACPI: OEMB 00000000bffbe040 00071 (v01 111909 OEMB2102 20091119
MSFT 00000097)
[ 0.000000] ACPI: HPET 00000000bffb9ad0 00038 (v01 111909 OEMHPET 20091119
MSFT 00000097)
[ 0.000000] ACPI: SSDT 00000000bffb9b10 0088C (v01 A M I POWERNOW 00000001
AMD 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] Scanning NUMA topology in Northbridge 24
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-00000000bffb0000
[ 0.000000] Initmem setup node 0 0000000000000000-00000000bffb0000
[ 0.000000] NODE_DATA [00000000bffa8000 - 00000000bffacfff]
[ 0.000000] [ffffea0000000000-ffffea00029fffff] PMD ->
[ffff8800bc600000-ffff8800beffffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal empty
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x000bffb0
[ 0.000000] On node 0 totalpages: 786239
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 5 pages reserved
[ 0.000000] DMA zone: 3922 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 10695 pages used for memmap
[ 0.000000] DMA32 zone: 771561 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8300 base: 0xfed00000
[ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009f000 -
00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 -
00000000000e6000
[ 0.000000] PM: Registered nosave memory: 00000000000e6000 -
0000000000100000
[ 0.000000] Allocating PCI resources starting at c0000000 (gap:
c0000000:3f700000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4
nr_node_ids:1
[ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff8800bfc00000 s78912 r8192
d23488 u524288
[ 0.000000] pcpu-alloc: s78912 r8192 d23488 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total
pages: 775483
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.0.0-1-amd64
root=UUID=2c84c000-f92f-4dc5-a4fa-f7c80fe5b5e1 ro quiet
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Node 0: aperture @ f30a000000 size 32 MB
[ 0.000000] Aperture beyond 4GB. Ignoring.
[ 0.000000] Memory: 3090664k/3145408k available (3325k kernel code, 452k
absent, 54292k reserved, 3370k data, 560k init)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] NR_IRQS:33024 nr_irqs:712 16
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2800.635 MHz processor.
[ 0.004003] Calibrating delay loop (skipped), value calculated using timer
frequency.. 5601.27 BogoMIPS (lpj=11202540)
[ 0.004007] pid_max: default: 32768 minimum: 301
[ 0.004075] Security Framework initialized
[ 0.004078] SELinux: Disabled at boot.
[ 0.004396] Dentry cache hash table entries: 524288 (order: 10, 4194304
bytes)
[ 0.008767] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.009424] Mount-cache hash table entries: 256
[ 0.009538] Initializing cgroup subsys cpuacct
[ 0.009542] Initializing cgroup subsys memory
[ 0.009552] Initializing cgroup subsys devices
[ 0.009554] Initializing cgroup subsys freezer
[ 0.009556] Initializing cgroup subsys net_cls
[ 0.009558] Initializing cgroup subsys blkio
[ 0.009590] tseg: 0000000000
[ 0.009608] CPU: Physical Processor ID: 0
[ 0.009609] CPU: Processor Core ID: 0
[ 0.009610] mce: CPU supports 6 MCE banks
[ 0.009852] ACPI: Core revision 20110413
[ 0.016342] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.059442] CPU0: AMD Athlon(tm) II X4 630 Processor stepping 02
[ 0.060003] Performance Events: AMD PMU driver.
[ 0.060003] ... version: 0
[ 0.060003] ... bit width: 48
[ 0.060003] ... generic registers: 4
[ 0.060003] ... value mask: 0000ffffffffffff
[ 0.060003] ... max period: 00007fffffffffff
[ 0.060003] ... fixed-purpose events: 0
[ 0.060003] ... event mask: 000000000000000f
[ 0.060003] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.060003] Booting Node 0, Processors #1
[ 0.060003] smpboot cpu 1: start_ip = 9a000
[ 0.148022] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.148112] #2
[ 0.148113] smpboot cpu 2: start_ip = 9a000
[ 0.240026] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.240118] #3 Ok.
[ 0.240119] smpboot cpu 3: start_ip = 9a000
[ 0.332038] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.332055] Brought up 4 CPUs
[ 0.332057] Total of 4 processors activated (22402.37 BogoMIPS).
[ 0.332524] devtmpfs: initialized
[ 0.337675] PM: Registering ACPI NVS region at bffbe000 (139264 bytes)
[ 0.337675] print_constraints: dummy:
[ 0.337675] NET: Registered protocol family 16
[ 0.337675] node 0 link 0: io port [1000, ffffff]
[ 0.337675] TOM: 00000000c0000000 aka 3072M
[ 0.337675] Fam 10h mmconf [e0000000, efffffff]
[ 0.337675] node 0 link 0: mmio [e0000000, efffffff] ==> none
[ 0.337675] node 0 link 0: mmio [f0000000, ffffffff]
[ 0.337675] node 0 link 0: mmio [a0000, bffff]
[ 0.337675] node 0 link 0: mmio [c0000000, dfffffff]
[ 0.337675] bus: [00, 07] on node 0 link 0
[ 0.337675] bus: 00 index 0 [io 0x0000-0xffff]
[ 0.337675] bus: 00 index 1 [mem 0xf0000000-0xfcffffffff]
[ 0.337675] bus: 00 index 2 [mem 0x000a0000-0x000bffff]
[ 0.337675] bus: 00 index 3 [mem 0xc0000000-0xdfffffff]
[ 0.337675] Extended Config Space enabled on 1 nodes
[ 0.337675] ACPI: bus type pci registered
[ 0.337675] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem
0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.337675] PCI: not using MMCONFIG
[ 0.337675] PCI: Using configuration type 1 for base access
[ 0.337675] PCI: Using configuration type 1 for extended access
[ 0.337675] bio: create slab <bio-0> at 0
[ 0.337675] ACPI: EC: Look up EC in DSDT
[ 0.340691] ACPI: Executed 5 blocks of module-level executable AML code
[ 0.356795] ACPI: Interpreter enabled
[ 0.356799] ACPI: (supports S0 S1 S4 S5)
[ 0.356818] ACPI: Using IOAPIC for interrupt routing
[ 0.356841] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem
0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.358389] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI
motherboard resources
[ 0.449019] ACPI: No dock devices found.
[ 0.449022] HEST: Table not found.
[ 0.449025] PCI: Using host bridge windows from ACPI; if necessary, use
"pci=nocrs" and report a bug
[ 0.449109] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.449270] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7]
[ 0.449272] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff]
[ 0.449274] pci_root PNP0A03:00: host bridge window [mem
0x000a0000-0x000bffff]
[ 0.449276] pci_root PNP0A03:00: host bridge window [mem
0x000d0000-0x000dffff]
[ 0.449278] pci_root PNP0A03:00: host bridge window [mem
0xc0000000-0xdfffffff]
[ 0.449280] pci_root PNP0A03:00: host bridge window [mem
0xf0000000-0xfebfffff]
[ 0.449294] pci 0000:00:00.0: [1002:5957] type 0 class 0x000600
[ 0.449306] pci 0000:00:00.0: reg 1c: [mem 0xe0000000-0xffffffff 64bit]
[ 0.449339] pci 0000:00:02.0: [1002:5978] type 1 class 0x000604
[ 0.449366] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[ 0.449368] pci 0000:00:02.0: PME# disabled
[ 0.449387] pci 0000:00:07.0: [1002:597d] type 1 class 0x000604
[ 0.449413] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
[ 0.449416] pci 0000:00:07.0: PME# disabled
[ 0.449449] pci 0000:00:11.0: [1002:4390] type 0 class 0x000101
[ 0.449471] pci 0000:00:11.0: reg 10: [io 0xc000-0xc007]
[ 0.449481] pci 0000:00:11.0: reg 14: [io 0xb000-0xb003]
[ 0.449491] pci 0000:00:11.0: reg 18: [io 0xa000-0xa007]
[ 0.449500] pci 0000:00:11.0: reg 1c: [io 0x9000-0x9003]
[ 0.449510] pci 0000:00:11.0: reg 20: [io 0x8000-0x800f]
[ 0.449520] pci 0000:00:11.0: reg 24: [mem 0xfe9ff800-0xfe9ffbff]
[ 0.449541] pci 0000:00:11.0: set SATA to AHCI mode
[ 0.449585] pci 0000:00:12.0: [1002:4397] type 0 class 0x000c03
[ 0.449599] pci 0000:00:12.0: reg 10: [mem 0xfe9fe000-0xfe9fefff]
[ 0.449664] pci 0000:00:12.1: [1002:4398] type 0 class 0x000c03
[ 0.449678] pci 0000:00:12.1: reg 10: [mem 0xfe9fd000-0xfe9fdfff]
[ 0.449749] pci 0000:00:12.2: [1002:4396] type 0 class 0x000c03
[ 0.449769] pci 0000:00:12.2: reg 10: [mem 0xfe9ff000-0xfe9ff0ff]
[ 0.449841] pci 0000:00:12.2: supports D1 D2
[ 0.449842] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[ 0.449846] pci 0000:00:12.2: PME# disabled
[ 0.449868] pci 0000:00:13.0: [1002:4397] type 0 class 0x000c03
[ 0.449882] pci 0000:00:13.0: reg 10: [mem 0xfe9fc000-0xfe9fcfff]
[ 0.449947] pci 0000:00:13.1: [1002:4398] type 0 class 0x000c03
[ 0.449961] pci 0000:00:13.1: reg 10: [mem 0xfe9fb000-0xfe9fbfff]
[ 0.450032] pci 0000:00:13.2: [1002:4396] type 0 class 0x000c03
[ 0.450052] pci 0000:00:13.2: reg 10: [mem 0xfe9fa800-0xfe9fa8ff]
[ 0.450124] pci 0000:00:13.2: supports D1 D2
[ 0.450125] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[ 0.450129] pci 0000:00:13.2: PME# disabled
[ 0.450154] pci 0000:00:14.0: [1002:4385] type 0 class 0x000c05
[ 0.450249] pci 0000:00:14.1: [1002:439c] type 0 class 0x000101
[ 0.450266] pci 0000:00:14.1: reg 10: [io 0x0000-0x0007]
[ 0.450276] pci 0000:00:14.1: reg 14: [io 0x0000-0x0003]
[ 0.450286] pci 0000:00:14.1: reg 18: [io 0x0000-0x0007]
[ 0.450296] pci 0000:00:14.1: reg 1c: [io 0x0000-0x0003]
[ 0.450305] pci 0000:00:14.1: reg 20: [io 0xff00-0xff0f]
[ 0.450356] pci 0000:00:14.2: [1002:4383] type 0 class 0x000403
[ 0.450378] pci 0000:00:14.2: reg 10: [mem 0xfe9f4000-0xfe9f7fff 64bit]
[ 0.450437] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[ 0.450441] pci 0000:00:14.2: PME# disabled
[ 0.450455] pci 0000:00:14.3: [1002:439d] type 0 class 0x000601
[ 0.450532] pci 0000:00:14.4: [1002:4384] type 1 class 0x000604
[ 0.450573] pci 0000:00:14.5: [1002:4399] type 0 class 0x000c03
[ 0.450587] pci 0000:00:14.5: reg 10: [mem 0xfe9f9000-0xfe9f9fff]
[ 0.450656] pci 0000:00:18.0: [1022:1200] type 0 class 0x000600
[ 0.450674] pci 0000:00:18.1: [1022:1201] type 0 class 0x000600
[ 0.450689] pci 0000:00:18.2: [1022:1202] type 0 class 0x000600
[ 0.450704] pci 0000:00:18.3: [1022:1203] type 0 class 0x000600
[ 0.450722] pci 0000:00:18.4: [1022:1204] type 0 class 0x000600
[ 0.450772] pci 0000:01:00.0: [1002:68f9] type 0 class 0x000300
[ 0.450783] pci 0000:01:00.0: reg 10: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.450792] pci 0000:01:00.0: reg 18: [mem 0xfeae0000-0xfeafffff 64bit]
[ 0.450798] pci 0000:01:00.0: reg 20: [io 0xd000-0xd0ff]
[ 0.450808] pci 0000:01:00.0: reg 30: [mem 0xfeac0000-0xfeadffff pref]
[ 0.450822] pci 0000:01:00.0: supports D1 D2
[ 0.450838] pci 0000:01:00.1: [1002:aa68] type 0 class 0x000403
[ 0.450849] pci 0000:01:00.1: reg 10: [mem 0xfeabc000-0xfeabffff 64bit]
[ 0.450884] pci 0000:01:00.1: supports D1 D2
[ 0.456053] pci 0000:00:02.0: PCI bridge to [bus 01-01]
[ 0.456058] pci 0000:00:02.0: bridge window [io 0xd000-0xdfff]
[ 0.456061] pci 0000:00:02.0: bridge window [mem 0xfea00000-0xfeafffff]
[ 0.456065] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff
64bit pref]
[ 0.456120] pci 0000:02:00.0: [10ec:8168] type 0 class 0x000200
[ 0.456134] pci 0000:02:00.0: reg 10: [io 0xe800-0xe8ff]
[ 0.456156] pci 0000:02:00.0: reg 18: [mem 0xfdfff000-0xfdffffff 64bit pref]
[ 0.456170] pci 0000:02:00.0: reg 20: [mem 0xfdff8000-0xfdffbfff 64bit pref]
[ 0.456179] pci 0000:02:00.0: reg 30: [mem 0xfebe0000-0xfebfffff pref]
[ 0.456211] pci 0000:02:00.0: supports D1 D2
[ 0.456212] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.456217] pci 0000:02:00.0: PME# disabled
[ 0.464055] pci 0000:00:07.0: PCI bridge to [bus 02-02]
[ 0.464061] pci 0000:00:07.0: bridge window [io 0xe000-0xefff]
[ 0.464063] pci 0000:00:07.0: bridge window [mem 0xfeb00000-0xfebfffff]
[ 0.464067] pci 0000:00:07.0: bridge window [mem 0xfdf00000-0xfdffffff
64bit pref]
[ 0.464142] pci 0000:00:14.4: PCI bridge to [bus 03-03] (subtractive decode)
[ 0.464146] pci 0000:00:14.4: bridge window [io 0xf000-0x0000] (disabled)
[ 0.464151] pci 0000:00:14.4: bridge window [mem 0xfff00000-0x000fffff]
(disabled)
[ 0.464155] pci 0000:00:14.4: bridge window [mem 0xfff00000-0x000fffff
pref] (disabled)
[ 0.464158] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7]
(subtractive decode)
[ 0.464160] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff]
(subtractive decode)
[ 0.464163] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff]
(subtractive decode)
[ 0.464165] pci 0000:00:14.4: bridge window [mem 0x000d0000-0x000dffff]
(subtractive decode)
[ 0.464168] pci 0000:00:14.4: bridge window [mem 0xc0000000-0xdfffffff]
(subtractive decode)
[ 0.464170] pci 0000:00:14.4: bridge window [mem 0xf0000000-0xfebfffff]
(subtractive decode)
[ 0.464186] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.464444] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE2._PRT]
[ 0.464484] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE7._PRT]
[ 0.464537] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PC._PRT]
[ 0.464621] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.464624] pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned
control mask: 0x1d
[ 0.464626] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 0.469244] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 7 10 *11 12 14 15)
[ 0.469283] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 *10 11 12 14 15)
[ 0.469318] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 *10 11 12 14 15)
[ 0.469353] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 7 10 *11 12 14 15)
[ 0.469387] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 10 11 12 14 15) *0,
disabled.
[ 0.469422] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 10 11 12 14 15) *0,
disabled.
[ 0.469457] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 *10 11 12 14 15)
[ 0.469492] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 10 11 12 14 15) *0,
disabled.
[ 0.469585] vgaarb: device added:
PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.469588] vgaarb: loaded
[ 0.469589] vgaarb: bridge control possible 0000:01:00.0
[ 0.469621] PCI: Using ACPI for IRQ routing
[ 0.478734] PCI: pci_cache_line_size set to 64 bytes
[ 0.478740] pci 0000:00:00.0: no compatible bridge window for [mem
0xe0000000-0xffffffff 64bit]
[ 0.478812] reserve RAM buffer: 000000000009f400 - 000000000009ffff
[ 0.478815] reserve RAM buffer: 00000000bffb0000 - 00000000bfffffff
[ 0.478907] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.478911] hpet0: 4 comparators, 32-bit 14.318180 MHz counter
[ 0.480060] Switching to clocksource hpet
[ 0.481425] pnp: PnP ACPI init
[ 0.481441] ACPI: bus type pnp registered
[ 0.481556] pnp 00:00: [bus 00-ff]
[ 0.481559] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.481561] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.481563] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.481565] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.481567] pnp 00:00: [mem 0x000d0000-0x000dffff window]
[ 0.481569] pnp 00:00: [mem 0xc0000000-0xdfffffff window]
[ 0.481571] pnp 00:00: [mem 0xf0000000-0xfebfffff window]
[ 0.481627] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
[ 0.481664] pnp 00:01: [dma 4]
[ 0.481666] pnp 00:01: [io 0x0000-0x000f]
[ 0.481667] pnp 00:01: [io 0x0081-0x0083]
[ 0.481669] pnp 00:01: [io 0x0087]
[ 0.481671] pnp 00:01: [io 0x0089-0x008b]
[ 0.481672] pnp 00:01: [io 0x008f]
[ 0.481674] pnp 00:01: [io 0x00c0-0x00df]
[ 0.481696] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.481705] pnp 00:02: [io 0x0070-0x0071]
[ 0.481714] pnp 00:02: [irq 8]
[ 0.481736] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.481744] pnp 00:03: [io 0x0061]
[ 0.481772] pnp 00:03: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.481780] pnp 00:04: [io 0x00f0-0x00ff]
[ 0.481784] pnp 00:04: [irq 13]
[ 0.481805] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.482914] pnp 00:05: [io 0x0378-0x037f]
[ 0.482918] pnp 00:05: [irq 7]
[ 0.482920] pnp 00:05: [dma 0 disabled]
[ 0.483083] Switched to NOHz mode on CPU #0
[ 0.483174] Switched to NOHz mode on CPU #2
[ 0.483189] pnp 00:05: Plug and Play ACPI device, IDs PNP0400 (active)
[ 0.483195] Switched to NOHz mode on CPU #1
[ 0.483213] Switched to NOHz mode on CPU #3
[ 0.483216] pnp 00:06: [mem 0xfed00000-0xfed003ff]
[ 0.483238] pnp 00:06: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.483282] pnp 00:07: [mem 0xfec00000-0xfec00fff]
[ 0.483284] pnp 00:07: [mem 0xfee00000-0xfee00fff]
[ 0.483336] system 00:07: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.483338] system 00:07: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.483341] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.483414] pnp 00:08: [io 0x0010-0x001f]
[ 0.483416] pnp 00:08: [io 0x0022-0x003f]
[ 0.483418] pnp 00:08: [io 0x0062-0x0063]
[ 0.483419] pnp 00:08: [io 0x0065-0x006f]
[ 0.483421] pnp 00:08: [io 0x0072-0x007f]
[ 0.483423] pnp 00:08: [io 0x0080]
[ 0.483425] pnp 00:08: [io 0x0084-0x0086]
[ 0.483426] pnp 00:08: [io 0x0088]
[ 0.483428] pnp 00:08: [io 0x008c-0x008e]
[ 0.483430] pnp 00:08: [io 0x0090-0x009f]
[ 0.483431] pnp 00:08: [io 0x00a2-0x00bf]
[ 0.483433] pnp 00:08: [io 0x00b1]
[ 0.483435] pnp 00:08: [io 0x00e0-0x00ef]
[ 0.483437] pnp 00:08: [io 0x04d0-0x04d1]
[ 0.483438] pnp 00:08: [io 0x040b]
[ 0.483441] pnp 00:08: [io 0x04d6]
[ 0.483442] pnp 00:08: [io 0x0c00-0x0c01]
[ 0.483444] pnp 00:08: [io 0x0c14]
[ 0.483446] pnp 00:08: [io 0x0c50-0x0c51]
[ 0.483447] pnp 00:08: [io 0x0c52]
[ 0.483449] pnp 00:08: [io 0x0c6c]
[ 0.483450] pnp 00:08: [io 0x0c6f]
[ 0.483452] pnp 00:08: [io 0x0cd0-0x0cd1]
[ 0.483454] pnp 00:08: [io 0x0cd2-0x0cd3]
[ 0.483456] pnp 00:08: [io 0x0cd4-0x0cd5]
[ 0.483457] pnp 00:08: [io 0x0cd6-0x0cd7]
[ 0.483459] pnp 00:08: [io 0x0cd8-0x0cdf]
[ 0.483461] pnp 00:08: [io 0x0800-0x089f]
[ 0.483463] pnp 00:08: [io 0x0b20-0x0b2f]
[ 0.483465] pnp 00:08: [io 0x0000-0xffffffffffffffff disabled]
[ 0.483467] pnp 00:08: [io 0x0900-0x090f]
[ 0.483468] pnp 00:08: [io 0x0910-0x091f]
[ 0.483470] pnp 00:08: [io 0xfe00-0xfefe]
[ 0.483472] pnp 00:08: [mem 0xffb80000-0xffbfffff]
[ 0.483474] pnp 00:08: [mem 0xfec10000-0xfec1001f]
[ 0.483541] system 00:08: [io 0x04d0-0x04d1] has been reserved
[ 0.483543] system 00:08: [io 0x040b] has been reserved
[ 0.483546] system 00:08: [io 0x04d6] has been reserved
[ 0.483548] system 00:08: [io 0x0c00-0x0c01] has been reserved
[ 0.483551] system 00:08: [io 0x0c14] has been reserved
[ 0.483553] system 00:08: [io 0x0c50-0x0c51] has been reserved
[ 0.483555] system 00:08: [io 0x0c52] has been reserved
[ 0.483558] system 00:08: [io 0x0c6c] has been reserved
[ 0.483560] system 00:08: [io 0x0c6f] has been reserved
[ 0.483562] system 00:08: [io 0x0cd0-0x0cd1] has been reserved
[ 0.483565] system 00:08: [io 0x0cd2-0x0cd3] has been reserved
[ 0.483567] system 00:08: [io 0x0cd4-0x0cd5] has been reserved
[ 0.483569] system 00:08: [io 0x0cd6-0x0cd7] has been reserved
[ 0.483572] system 00:08: [io 0x0cd8-0x0cdf] has been reserved
[ 0.483574] system 00:08: [io 0x0800-0x089f] has been reserved
[ 0.483577] system 00:08: [io 0x0b20-0x0b2f] has been reserved
[ 0.483579] system 00:08: [io 0x0900-0x090f] has been reserved
[ 0.483583] system 00:08: [io 0x0910-0x091f] has been reserved
[ 0.483585] system 00:08: [io 0xfe00-0xfefe] has been reserved
[ 0.483588] system 00:08: [mem 0xffb80000-0xffbfffff] has been reserved
[ 0.483591] system 00:08: [mem 0xfec10000-0xfec1001f] has been reserved
[ 0.483593] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.483618] pnp 00:09: [io 0x0060]
[ 0.483619] pnp 00:09: [io 0x0064]
[ 0.483623] pnp 00:09: [irq 1]
[ 0.483652] pnp 00:09: Plug and Play ACPI device, IDs PNP0303 PNP030b
(active)
[ 0.483801] pnp 00:0a: [io 0x0000-0xffffffffffffffff disabled]
[ 0.483803] pnp 00:0a: [io 0x0e00-0x0e0f]
[ 0.483805] pnp 00:0a: [io 0x0e80-0x0e8f]
[ 0.483806] pnp 00:0a: [io 0x0f40-0x0f4f]
[ 0.483808] pnp 00:0a: [io 0x0a30-0x0a3f]
[ 0.483848] system 00:0a: [io 0x0e00-0x0e0f] has been reserved
[ 0.483850] system 00:0a: [io 0x0e80-0x0e8f] has been reserved
[ 0.483853] system 00:0a: [io 0x0f40-0x0f4f] has been reserved
[ 0.483855] system 00:0a: [io 0x0a30-0x0a3f] has been reserved
[ 0.483858] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.484459] pnp 00:0b: [io 0x03f8-0x03ff]
[ 0.484463] pnp 00:0b: [irq 4]
[ 0.484466] pnp 00:0b: [dma 0 disabled]
[ 0.484542] pnp 00:0b: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.484571] pnp 00:0c: [mem 0xe0000000-0xefffffff]
[ 0.484610] system 00:0c: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.484613] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.488217] pnp 00:0d: [mem 0x00000000-0x0009ffff]
[ 0.488220] pnp 00:0d: [mem 0x000c0000-0x000cffff]
[ 0.488222] pnp 00:0d: [mem 0x000e0000-0x000fffff]
[ 0.488224] pnp 00:0d: [mem 0x00100000-0xbfffffff]
[ 0.488226] pnp 00:0d: [mem 0xfec00000-0xffffffff]
[ 0.488233] pnp 00:0d: disabling [mem 0x00000000-0x0009ffff] because it
overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[ 0.488237] pnp 00:0d: disabling [mem 0x000c0000-0x000cffff] because it
overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[ 0.488240] pnp 00:0d: disabling [mem 0x000e0000-0x000fffff] because it
overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[ 0.488243] pnp 00:0d: disabling [mem 0x00100000-0xbfffffff] because it
overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[ 0.488330] system 00:0d: [mem 0xfec00000-0xffffffff] could not be reserved
[ 0.488333] system 00:0d: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.488430] pnp: PnP ACPI: found 14 devices
[ 0.488431] ACPI: ACPI bus type pnp unregistered
[ 0.494277] PCI: max bus depth: 1 pci_try_num: 2
[ 0.494296] pci 0000:00:02.0: PCI bridge to [bus 01-01]
[ 0.494299] pci 0000:00:02.0: bridge window [io 0xd000-0xdfff]
[ 0.494302] pci 0000:00:02.0: bridge window [mem 0xfea00000-0xfeafffff]
[ 0.494304] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff
64bit pref]
[ 0.494308] pci 0000:00:07.0: PCI bridge to [bus 02-02]
[ 0.494310] pci 0000:00:07.0: bridge window [io 0xe000-0xefff]
[ 0.494313] pci 0000:00:07.0: bridge window [mem 0xfeb00000-0xfebfffff]
[ 0.494316] pci 0000:00:07.0: bridge window [mem 0xfdf00000-0xfdffffff
64bit pref]
[ 0.494320] pci 0000:00:14.4: PCI bridge to [bus 03-03]
[ 0.494321] pci 0000:00:14.4: bridge window [io disabled]
[ 0.494326] pci 0000:00:14.4: bridge window [mem disabled]
[ 0.494330] pci 0000:00:14.4: bridge window [mem pref disabled]
[ 0.494349] pci 0000:00:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 0.494353] pci 0000:00:02.0: setting latency timer to 64
[ 0.494360] pci 0000:00:07.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 0.494363] pci 0000:00:07.0: setting latency timer to 64
[ 0.494370] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.494371] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.494374] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.494375] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.494377] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xdfffffff]
[ 0.494379] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfebfffff]
[ 0.494381] pci_bus 0000:01: resource 0 [io 0xd000-0xdfff]
[ 0.494383] pci_bus 0000:01: resource 1 [mem 0xfea00000-0xfeafffff]
[ 0.494385] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit
pref]
[ 0.494388] pci_bus 0000:02: resource 0 [io 0xe000-0xefff]
[ 0.494390] pci_bus 0000:02: resource 1 [mem 0xfeb00000-0xfebfffff]
[ 0.494392] pci_bus 0000:02: resource 2 [mem 0xfdf00000-0xfdffffff 64bit
pref]
[ 0.494394] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7]
[ 0.494396] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff]
[ 0.494398] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.494400] pci_bus 0000:03: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.494402] pci_bus 0000:03: resource 8 [mem 0xc0000000-0xdfffffff]
[ 0.494403] pci_bus 0000:03: resource 9 [mem 0xf0000000-0xfebfffff]
[ 0.494523] NET: Registered protocol family 2
[ 0.494670] IP route cache hash table entries: 131072 (order: 8, 1048576
bytes)
[ 0.495817] TCP established hash table entries: 524288 (order: 11, 8388608
bytes)
[ 0.498555] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.498892] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.498894] TCP reno registered
[ 0.498907] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.498941] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.499123] NET: Registered protocol family 1
[ 0.664069] pci 0000:01:00.0: Boot video device
[ 0.664077] PCI: CLS 64 bytes, default 64
[ 0.664118] Unpacking initramfs...
[ 0.706776] Freeing initrd memory: 2392k freed
[ 0.708998] audit: initializing netlink socket (disabled)
[ 0.709011] type=2000 audit(1318361370.704:1): initialized
[ 0.726009] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.737133] VFS: Disk quotas dquot_6.5.2
[ 0.737170] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.737233] msgmni has been set to 6041
[ 0.737423] alg: No test for stdrng (krng)
[ 0.737459] Block layer SCSI generic (bsg) driver version 0.4 loaded (major
253)
[ 0.737462] io scheduler noop registered
[ 0.737463] io scheduler deadline registered
[ 0.737488] io scheduler cfq registered (default)
[ 0.737599] pcieport 0000:00:02.0: setting latency timer to 64
[ 0.737627] pcieport 0000:00:02.0: irq 40 for MSI/MSI-X
[ 0.737708] pcieport 0000:00:07.0: setting latency timer to 64
[ 0.737731] pcieport 0000:00:07.0: irq 41 for MSI/MSI-X
[ 0.737886] ERST: Table is not found!
[ 0.737951] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.758419] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.968758] 00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.969042] Linux agpgart interface v0.103
[ 0.969134] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 0.969136] i8042: PNP: PS/2 appears to have AUX port disabled, if this is
incorrect please boot with i8042.nopnp
[ 0.969266] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.969344] mousedev: PS/2 mouse device common for all mice
[ 0.969382] rtc_cmos 00:02: RTC can wake from S4
[ 0.969468] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 0.969492] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 0.969501] cpuidle: using governor ladder
[ 0.969502] cpuidle: using governor menu
[ 0.969718] TCP cubic registered
[ 0.969798] NET: Registered protocol family 10
[ 0.970263] Mobile IPv6
[ 0.970265] NET: Registered protocol family 17
[ 0.970269] Registering the dns_resolver key type
[ 0.970370] PM: Hibernation image not present or could not be loaded.
[ 0.970381] registered taskstats version 1
[ 0.976143] rtc_cmos 00:02: setting system clock to 2011-10-11 19:29:31 UTC
(1318361371)
[ 0.976175] Initializing network drop monitor service
[ 0.977134] Freeing unused kernel memory: 560k freed
[ 0.977241] Write protecting the kernel read-only data: 6144k
[ 0.979752] Freeing unused kernel memory: 752k freed
[ 0.982369] Freeing unused kernel memory: 720k freed
[ 0.991760] input: AT Translated Set 2 keyboard as
/devices/platform/i8042/serio0/input/input0
[ 0.994894] udevd[82]: starting version 172
[ 1.006195] SCSI subsystem initialized
[ 1.011560] thermal LNXTHERM:00: registered as thermal_zone0
[ 1.011563] ACPI: Thermal Zone [THRM] (47 C)
[ 1.016570] libata version 3.00 loaded.
[ 1.023170] ahci 0000:00:11.0: version 3.0
[ 1.023198] ahci 0000:00:11.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 1.023251] ahci 0000:00:11.0: irq 42 for MSI/MSI-X
[ 1.023340] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf
impl SATA mode
[ 1.023344] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio
slum part ccc
[ 1.027654] scsi0 : ahci
[ 1.028172] scsi1 : ahci
[ 1.030131] scsi2 : ahci
[ 1.031505] scsi3 : ahci
[ 1.031637] ata1: SATA max UDMA/133 abar m1024@0xfe9ff800 port 0xfe9ff900
irq 42
[ 1.031641] ata2: SATA max UDMA/133 abar m1024@0xfe9ff800 port 0xfe9ff980
irq 42
[ 1.031644] ata3: SATA max UDMA/133 abar m1024@0xfe9ff800 port 0xfe9ffa00
irq 42
[ 1.031647] ata4: SATA max UDMA/133 abar m1024@0xfe9ff800 port 0xfe9ffa80
irq 42
[ 1.352078] ata4: SATA link down (SStatus 0 SControl 300)
[ 1.352131] ata3: SATA link down (SStatus 0 SControl 300)
[ 1.520048] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.520867] ata1.00: ATA-8: Hitachi HDS721050CLA362, JP2OA39C, max UDMA/133
[ 1.520871] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32),
AA
[ 1.521781] ata1.00: configured for UDMA/133
[ 1.521964] scsi 0:0:0:0: Direct-Access ATA Hitachi HDS72105 JP2O
PQ: 0 ANSI: 5
[ 1.524066] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.527091] ata2.00: ATAPI: HL-DT-ST DVDRAM GH22LS40, LL02, max UDMA/100
[ 1.530921] ata2.00: configured for UDMA/100
[ 1.539562] scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GH22LS40 LL02
PQ: 0 ANSI: 5
[ 1.542986] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465
GiB)
[ 1.543113] sd 0:0:0:0: [sda] Write Protect is off
[ 1.543117] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.543147] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 1.621464] sda: sda1 sda2 sda3 < sda5 sda6 > sda4
[ 1.621958] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.708051] Refined TSC clocksource calibration: 2800.156 MHz.
[ 1.708062] Switching to clocksource tsc
[ 2.674397] PM: Starting manual resume from disk
[ 2.674401] PM: Hibernation image partition 8:6 present
[ 2.674402] PM: Looking for hibernation image.
[ 2.694202] PM: Image not found (code -22)
[ 2.694205] PM: Hibernation image not present or could not be loaded.
[ 2.725631] EXT3-fs: barriers not enabled
[ 2.743060] kjournald starting. Commit interval 5 seconds
[ 2.743135] EXT3-fs (sda5): mounted filesystem with ordered data mode
[ 4.219140] udevd[292]: starting version 172
[ 4.777140] ACPI: acpi_idle registered with cpuidle
[ 4.780475] input: Power Button as
/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[ 4.780481] ACPI: Power Button [PWRB]
[ 4.780529] input: Power Button as
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 4.780532] ACPI: Power Button [PWRF]
[ 4.794119] wmi: Mapper loaded
[ 4.894382] parport_pc 00:05: reported by Plug and Play ACPI
[ 4.894437] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 4.913516] input: PC Speaker as /devices/platform/pcspkr/input/input3
[ 5.131987] pata_atiixp 0000:00:14.1: PCI INT A -> GSI 16 (level, low) ->
IRQ 16
[ 5.132032] pata_atiixp 0000:00:14.1: setting latency timer to 64
[ 5.132294] scsi4 : pata_atiixp
[ 5.132349] scsi5 : pata_atiixp
[ 5.132891] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14
[ 5.132894] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15
[ 5.161718] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00,
revision 0
[ 5.234583] [drm] Initialized drm 1.1.0 20060810
[ 5.241555] MCE: In-kernel MCE decoding enabled.
[ 5.299256] usbcore: registered new interface driver usbfs
[ 5.299277] usbcore: registered new interface driver hub
[ 5.299328] usbcore: registered new device driver usb
[ 5.338249] EDAC MC: Ver: 2.1.0
[ 5.341940] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 5.341962] r8169 0000:02:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 5.341993] r8169 0000:02:00.0: setting latency timer to 64
[ 5.342036] r8169 0000:02:00.0: irq 43 for MSI/MSI-X
[ 5.342422] r8169 0000:02:00.0: eth0: RTL8168d/8111d at 0xffffc9000061e000,
00:30:67:55:b5:dd, XID 081000c0 IRQ 43
[ 5.382122] AMD64 EDAC driver v3.4.0
[ 5.382217] EDAC amd64: DRAM ECC disabled.
[ 5.382226] EDAC amd64: ECC disabled in the BIOS or no ECC capability,
module will not load.
[ 5.382227] Either enable ECC checking or force module loading by setting
'ecc_enable_override'.
[ 5.382228] (Note that use of the override may cause unknown side effects.)
[ 5.465529] SP5100 TCO timer: SP5100 TCO WatchDog Timer Driver v0.01
[ 5.465591] SP5100 TCO timer: mmio address 0xfec000f0 already in use
[ 5.611423] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda
tray
[ 5.611427] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 5.611564] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 5.627603] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 5.627635] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 5.628331] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ
16
[ 5.681549] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 5.726279] hda_codec: ALC662 rev1: BIOS auto-probing.
[ 5.730387] input: HDA ATI SB Headphone as
/devices/pci0000:00/0000:00:14.2/sound/card0/input4
[ 5.730564] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ
17
[ 5.730583] ehci_hcd 0000:00:12.2: EHCI Host Controller
[ 5.730607] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus
number 1
[ 5.730616] ehci_hcd 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI
dummy qh workaround
[ 5.730642] ehci_hcd 0000:00:12.2: debug port 1
[ 5.730674] ehci_hcd 0000:00:12.2: irq 17, io mem 0xfe9ff000
[ 5.730693] HDA Intel 0000:01:00.1: PCI INT B -> GSI 19 (level, low) -> IRQ
19
[ 5.730725] HDA Intel 0000:01:00.1: irq 44 for MSI/MSI-X
[ 5.730739] HDA Intel 0000:01:00.1: setting latency timer to 64
[ 5.740050] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 5.740076] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 5.740078] usb usb1: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 5.740081] usb usb1: Product: EHCI Host Controller
[ 5.740082] usb usb1: Manufacturer: Linux 3.0.0-1-amd64 ehci_hcd
[ 5.740084] usb usb1: SerialNumber: 0000:00:12.2
[ 5.740196] hub 1-0:1.0: USB hub found
[ 5.740200] hub 1-0:1.0: 6 ports detected
[ 5.740329] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 19 (level, low) -> IRQ
19
[ 5.740349] ehci_hcd 0000:00:13.2: EHCI Host Controller
[ 5.740358] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus
number 2
[ 5.740367] ehci_hcd 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI
dummy qh workaround
[ 5.740389] ehci_hcd 0000:00:13.2: debug port 1
[ 5.740414] ehci_hcd 0000:00:13.2: irq 19, io mem 0xfe9fa800
[ 5.752067] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 5.752092] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 5.752094] usb usb2: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 5.752096] usb usb2: Product: EHCI Host Controller
[ 5.752098] usb usb2: Manufacturer: Linux 3.0.0-1-amd64 ehci_hcd
[ 5.752099] usb usb2: SerialNumber: 0000:00:13.2
[ 5.752213] hub 2-0:1.0: USB hub found
[ 5.752217] hub 2-0:1.0: 6 ports detected
[ 5.831127] HDMI status: Pin=3 Presence_Detect=0 ELD_Valid=0
[ 5.831397] input: HD-Audio Generic HDMI/DP as
/devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input5
[ 5.837922] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 5.838395] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 16 (level, low) -> IRQ
16
[ 5.838418] ohci_hcd 0000:00:12.0: OHCI Host Controller
[ 5.838438] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus
number 3
[ 5.838467] ohci_hcd 0000:00:12.0: irq 16, io mem 0xfe9fe000
[ 5.896056] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 5.896060] usb usb3: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 5.896062] usb usb3: Product: OHCI Host Controller
[ 5.896064] usb usb3: Manufacturer: Linux 3.0.0-1-amd64 ohci_hcd
[ 5.896065] usb usb3: SerialNumber: 0000:00:12.0
[ 5.896186] hub 3-0:1.0: USB hub found
[ 5.896192] hub 3-0:1.0: 3 ports detected
[ 5.896323] ohci_hcd 0000:00:12.1: PCI INT A -> GSI 16 (level, low) -> IRQ
16
[ 5.896341] ohci_hcd 0000:00:12.1: OHCI Host Controller
[ 5.896349] ohci_hcd 0000:00:12.1: new USB bus registered, assigned bus
number 4
[ 5.896369] ohci_hcd 0000:00:12.1: irq 16, io mem 0xfe9fd000
[ 5.943728] [drm] radeon kernel modesetting enabled.
[ 5.943855] radeon 0000:01:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 5.943860] radeon 0000:01:00.0: setting latency timer to 64
[ 5.944054] [drm] initializing kernel modesetting (CEDAR 0x1002:0x68F9
0x0000:0x0000).
[ 5.944074] [drm] register mmio base: 0xFEAE0000
[ 5.944076] [drm] register mmio size: 131072
[ 5.948118] ATOM BIOS: CEDAR
[ 5.948188] radeon 0000:01:00.0: VRAM: 512M 0x0000000000000000 -
0x000000001FFFFFFF (512M used)
[ 5.948190] radeon 0000:01:00.0: GTT: 512M 0x0000000020000000 -
0x000000003FFFFFFF
[ 5.948391] [drm] Detected VRAM RAM=512M, BAR=256M
[ 5.948394] [drm] RAM width 64bits DDR
[ 5.948464] [TTM] Zone kernel: Available graphics memory: 1547544 kiB.
[ 5.948466] [TTM] Initializing pool allocator.
[ 5.948492] [drm] radeon: 512M of VRAM memory ready
[ 5.948493] [drm] radeon: 512M of GTT memory ready.
[ 5.948508] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 5.948509] [drm] Driver supports precise vblank timestamp query.
[ 5.948542] radeon 0000:01:00.0: irq 45 for MSI/MSI-X
[ 5.948546] radeon 0000:01:00.0: radeon: using MSI.
[ 5.948572] [drm] radeon: irq initialized.
[ 5.948576] [drm] GART: num cpu pages 131072, num gpu pages 131072
[ 5.949577] [drm] Loading CEDAR Microcode
[ 5.956072] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 5.956076] usb usb4: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 5.956078] usb usb4: Product: OHCI Host Controller
[ 5.956080] usb usb4: Manufacturer: Linux 3.0.0-1-amd64 ohci_hcd
[ 5.956081] usb usb4: SerialNumber: 0000:00:12.1
[ 5.956199] hub 4-0:1.0: USB hub found
[ 5.956205] hub 4-0:1.0: 3 ports detected
[ 5.956321] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ
18
[ 5.956342] ohci_hcd 0000:00:13.0: OHCI Host Controller
[ 5.956353] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus
number 5
[ 5.956381] ohci_hcd 0000:00:13.0: irq 18, io mem 0xfe9fc000
[ 6.016055] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 6.016058] usb usb5: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 6.016060] usb usb5: Product: OHCI Host Controller
[ 6.016062] usb usb5: Manufacturer: Linux 3.0.0-1-amd64 ohci_hcd
[ 6.016064] usb usb5: SerialNumber: 0000:00:13.0
[ 6.016183] hub 5-0:1.0: USB hub found
[ 6.016189] hub 5-0:1.0: 3 ports detected
[ 6.016315] ohci_hcd 0000:00:13.1: PCI INT A -> GSI 18 (level, low) -> IRQ
18
[ 6.016336] ohci_hcd 0000:00:13.1: OHCI Host Controller
[ 6.016344] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus
number 6
[ 6.016362] ohci_hcd 0000:00:13.1: irq 18, io mem 0xfe9fb000
[ 6.076058] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 6.076061] usb usb6: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 6.076064] usb usb6: Product: OHCI Host Controller
[ 6.076065] usb usb6: Manufacturer: Linux 3.0.0-1-amd64 ohci_hcd
[ 6.076067] usb usb6: SerialNumber: 0000:00:13.1
[ 6.076191] hub 6-0:1.0: USB hub found
[ 6.076197] hub 6-0:1.0: 3 ports detected
[ 6.076319] ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ
18
[ 6.076341] ohci_hcd 0000:00:14.5: OHCI Host Controller
[ 6.076350] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus
number 7
[ 6.076369] ohci_hcd 0000:00:14.5: irq 18, io mem 0xfe9f9000
[ 6.136055] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 6.136058] usb usb7: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 6.136060] usb usb7: Product: OHCI Host Controller
[ 6.136062] usb usb7: Manufacturer: Linux 3.0.0-1-amd64 ohci_hcd
[ 6.136063] usb usb7: SerialNumber: 0000:00:14.5
[ 6.136184] hub 7-0:1.0: USB hub found
[ 6.136190] hub 7-0:1.0: 2 ports detected
[ 6.198612] radeon 0000:01:00.0: WB enabled
[ 6.214714] [drm] ring test succeeded in 1 usecs
[ 6.214808] [drm] radeon: ib pool ready.
[ 6.214866] [drm] ib test succeeded in 0 usecs
[ 6.214872] failed to evaluate ATIF got AE_BAD_PARAMETER
[ 6.215329] [drm] Radeon Display Connectors
[ 6.215331] [drm] Connector 0:
[ 6.215333] [drm] HDMI-A
[ 6.215334] [drm] HPD1
[ 6.215336] [drm] DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c
0x643c
[ 6.215337] [drm] Encoders:
[ 6.215339] [drm] DFP1: INTERNAL_UNIPHY1
[ 6.215340] [drm] Connector 1:
[ 6.215341] [drm] DVI-I
[ 6.215342] [drm] HPD4
[ 6.215344] [drm] DDC: 0x6460 0x6460 0x6464 0x6464 0x6468 0x6468 0x646c
0x646c
[ 6.215345] [drm] Encoders:
[ 6.215346] [drm] DFP2: INTERNAL_UNIPHY
[ 6.215348] [drm] CRT1: INTERNAL_KLDSCP_DAC1
[ 6.215349] [drm] Connector 2:
[ 6.215350] [drm] VGA
[ 6.215352] [drm] DDC: 0x64d8 0x64d8 0x64dc 0x64dc 0x64e0 0x64e0 0x64e4
0x64e4
[ 6.215353] [drm] Encoders:
[ 6.215354] [drm] CRT2: INTERNAL_KLDSCP_DAC2
[ 6.220066] usb 1-6: new high speed USB device number 4 using ehci_hcd
[ 6.225130] [drm] Radeon display connector HDMI-A-1: No monitor connected or
invalid EDID
[ 6.277298] [drm] Radeon display connector DVI-I-1: Found valid EDID
[ 6.287010] [drm] Radeon display connector VGA-1: No monitor connected or
invalid EDID
[ 6.287029] [drm] Internal thermal controller with fan control
[ 6.287065] [drm] radeon: power management initialized
[ 6.367943] [drm] fb mappable at 0xD0141000
[ 6.367945] [drm] vram apper at 0xD0000000
[ 6.367947] [drm] size 8294400
[ 6.367948] [drm] fb depth is 24
[ 6.367949] [drm] pitch is 7680
[ 6.368050] fbcon: radeondrmfb (fb0) is primary device
[ 6.562660] usb 1-6: New USB device found, idVendor=058f, idProduct=6387
[ 6.562662] usb 1-6: New USB device strings: Mfr=1, Product=2,
SerialNumber=3
[ 6.562665] usb 1-6: Product: Flash Disk
[ 6.562666] usb 1-6: SerialNumber: 8F1CBD82
[ 6.589876] Console: switching to colour frame buffer device 240x67
[ 6.595552] fb0: radeondrmfb frame buffer device
[ 6.595554] drm: registered panic notifier
[ 6.595564] [drm] Initialized radeon 2.10.0 20080528 for 0000:01:00.0 on
minor 0
[ 6.936054] usb 3-1: new full speed USB device number 2 using ohci_hcd
[ 7.322032] usb 3-1: New USB device found, idVendor=0a12, idProduct=0001
[ 7.322035] usb 3-1: New USB device strings: Mfr=0, Product=2,
SerialNumber=0
[ 7.322038] usb 3-1: Product: BT2.0
[ 7.588036] usb 3-2: new low speed USB device number 3 using ohci_hcd
[ 7.755006] usb 3-2: New USB device found, idVendor=046d, idProduct=c016
[ 7.755009] usb 3-2: New USB device strings: Mfr=1, Product=2,
SerialNumber=0
[ 7.755011] usb 3-2: Product: Optical USB Mouse
[ 7.755013] usb 3-2: Manufacturer: Logitech
[ 7.811930] usbcore: registered new interface driver uas
[ 7.839869] Initializing USB Mass Storage driver...
[ 7.840038] scsi6 : usb-storage 1-6:1.0
[ 7.840126] usbcore: registered new interface driver usb-storage
[ 7.840128] USB Mass Storage support registered.
[ 7.843166] input: Logitech Optical USB Mouse as
/devices/pci0000:00/0000:00:12.0/usb3/3-2/3-2:1.0/input/input6
[ 7.843314] generic-usb 0003:046D:C016.0001: input,hidraw0: USB HID v1.10
Mouse [Logitech Optical USB Mouse] on usb-0000:00:12.0-2/input0
[ 7.843332] usbcore: registered new interface driver usbhid
[ 7.843334] usbhid: USB HID core driver
[ 7.853379] Bluetooth: Core ver 2.16
[ 7.853407] NET: Registered protocol family 31
[ 7.853411] Bluetooth: HCI device and connection manager initialized
[ 7.853415] Bluetooth: HCI socket layer initialized
[ 7.853416] Bluetooth: L2CAP socket layer initialized
[ 7.853606] Bluetooth: SCO socket layer initialized
[ 7.868819] Bluetooth: Generic Bluetooth USB driver ver 0.6
[ 7.869028] usbcore: registered new interface driver btusb
[ 8.020040] usb 5-2: new full speed USB device number 2 using ohci_hcd
[ 8.195978] usb 5-2: New USB device found, idVendor=045e, idProduct=028e
[ 8.195981] usb 5-2: New USB device strings: Mfr=1, Product=2,
SerialNumber=3
[ 8.195984] usb 5-2: Product: Controller
[ 8.195985] usb 5-2: Manufacturer: ©Microsoft Corporation
[ 8.195987] usb 5-2: SerialNumber: 030936D
[ 8.436470] Registered led device: xpad0
[ 8.436541] input: Microsoft X-Box 360 pad as
/devices/pci0000:00/0000:00:13.0/usb5/5-2/5-2:1.0/input/input7
[ 8.436608] usbcore: registered new interface driver xpad
[ 8.734176] Adding 6115324k swap on /dev/sda6. Priority:-1 extents:1
across:6115324k
[ 8.840897] scsi 6:0:0:0: Direct-Access Flash Disk 8.07
PQ: 0 ANSI: 2
[ 9.055608] EXT3-fs (sda5): using internal journal
[ 9.112249] sd 6:0:0:0: Attached scsi generic sg2 type 0
[ 9.113438] sd 6:0:0:0: [sdb] 7888896 512-byte logical blocks: (4.03 GB/3.76
GiB)
[ 9.113956] sd 6:0:0:0: [sdb] Write Protect is off
[ 9.113960] sd 6:0:0:0: [sdb] Mode Sense: 03 00 00 00
[ 9.115433] sd 6:0:0:0: [sdb] No Caching mode page present
[ 9.115466] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 9.118577] sd 6:0:0:0: [sdb] No Caching mode page present
[ 9.118609] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 9.170758] loop: module loaded
[ 10.114898] sdb: sdb1 sdb2 < >
[ 10.116893] sd 6:0:0:0: [sdb] No Caching mode page present
[ 10.116927] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 10.116956] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[ 10.952766] EXT3-fs: barriers not enabled
[ 10.953065] kjournald starting. Commit interval 5 seconds
[ 10.953388] EXT3-fs (sda4): using internal journal
[ 10.953391] EXT3-fs (sda4): mounted filesystem with ordered data mode
[ 11.802722] RPC: Registered named UNIX socket transport module.
[ 11.802725] RPC: Registered udp transport module.
[ 11.802727] RPC: Registered tcp transport module.
[ 11.802728] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 11.839431] FS-Cache: Loaded
[ 11.853872] FS-Cache: Netfs 'nfs' registered for caching
[ 11.858965] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 12.382281] fuse init (API version 7.16)
[ 14.583005] r8169 0000:02:00.0: eth0: unable to load firmware patch
rtl_nic/rtl8168d-1.fw (-2)
[ 14.590894] r8169 0000:02:00.0: eth0: link down
[ 14.590913] r8169 0000:02:00.0: eth0: link down
[ 14.591321] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 16.278276] r8169 0000:02:00.0: eth0: link up
[ 16.278673] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 17.213957] Bluetooth: RFCOMM TTY layer initialized
[ 17.213963] Bluetooth: RFCOMM socket layer initialized
[ 17.213965] Bluetooth: RFCOMM ver 1.11
[ 17.269639] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 17.269642] Bluetooth: BNEP filters: protocol multicast
[ 17.799393] lp0: using parport0 (interrupt-driven).
[ 17.804381] ppdev: user-space parallel port driver
[ 21.688514] powernow-k8: Found 1 AMD Athlon(tm) II X4 630 Processor (4 cpu
cores) (version 2.20.00)
[ 21.688553] powernow-k8: 0 : pstate 0 (2800 MHz)
[ 21.688554] powernow-k8: 1 : pstate 1 (2100 MHz)
[ 21.688556] powernow-k8: 2 : pstate 2 (1600 MHz)
[ 21.688557] powernow-k8: 3 : pstate 3 (800 MHz)
[ 26.472044] eth0: no IPv6 routers present
[ 59.348977] FAT-fs (sdb1): utf8 is not a recommended IO charset for FAT
filesystems, filesystem will be case sensitive!
[ 59.348984]
[ 63.149805] iron (2181): /proc/2201/oom_adj is deprecated, please use
/proc/2201/oom_score_adj instead.
[ 6741.426047] reportbug[13085] trap divide error ip:7f4d24a55eb6
sp:7f4d1d37fe10 error:0 in libgtk-x11-2.0.so.0.2400.4[7f4d24921000+43f000]