Dear Maintainer,

Attempting to pair with my bluetooth keyboard/mouse combo, the passkey
for completing the paring, that I'm supposed to enter on the keyboard
does not get shown. After a short period, the pairing is aborted as
unsuccesful. If I run hcidump at the same time, the passcode is
displayed, and entering leads to a succesful pairing.

It's of course possible that this is a bluez problem, but from my point
of view I have no way of telling.

Here's a hcidump of a succesful pairing (where the interface did not
show me the passkey, but I read it off hcidump). A bunch of additional
pairing chatter happens after that, of course:

HCI sniffer - Bluetooth packet analyzer ver 2.5
device: hci0 snap_len: 1500 filter: 0xffffffffffffffff
< HCI Command: Inquiry Cancel (0x01|0x0002) plen 0
    Inquiry Cancel (0x01|0x0002) ncmd 1
    status 0x00
< HCI Command: Create Connection (0x01|0x0005) plen 13
    bdaddr 90:7F:61:11:2D:1A ptype 0xcc18 rswitch 0x01 clkoffset 0x0000
    Packet type: DM1 DM3 DM5 DH1 DH3 DH5
    Create Connection (0x01|0x0005) status 0x00 ncmd 1
    status 0x00 handle 12 bdaddr 90:7F:61:11:2D:1A type ACL encrypt 0x00
< HCI Command: Read Remote Supported Features (0x01|0x001b) plen 2
    handle 12
    Read Remote Supported Features (0x01|0x001b) status 0x00 ncmd 1
    handle 12 slots 5
    status 0x00 handle 12
    Features: 0xbf 0x06 0x86 0x78 0x18 0x1e 0x59 0x87
< HCI Command: Read Remote Extended Features (0x01|0x001c) plen 3
    handle 12 page 1
    Read Remote Extended Features (0x01|0x001c) status 0x00 ncmd 1
    status 0x00 handle 12 page 1 max 1
    Features: 0x01 0x00 0x00 0x00 0x00 0x00 0x00 0x00
< HCI Command: Remote Name Request (0x01|0x0019) plen 10
    bdaddr 90:7F:61:11:2D:1A mode 2 clkoffset 0x0000
    Remote Name Request (0x01|0x0019) status 0x00 ncmd 1
    status 0x00 bdaddr 90:7F:61:11:2D:1A name 'ThinkPad Compact Bluetooth Keyboard with TrackPoint'
< HCI Command: Authentication Requested (0x01|0x0011) plen 2
    handle 12
    Authentication Requested (0x01|0x0011) status 0x00 ncmd 1
    bdaddr 90:7F:61:11:2D:1A
< HCI Command: Link Key Request Negative Reply (0x01|0x000c) plen 6
    bdaddr 90:7F:61:11:2D:1A
    Link Key Request Negative Reply (0x01|0x000c) ncmd 1
    status 0x00 bdaddr 90:7F:61:11:2D:1A
    bdaddr 90:7F:61:11:2D:1A
< HCI Command: IO Capability Request Reply (0x01|0x002b) plen 9
    bdaddr 90:7F:61:11:2D:1A capability 0x01 oob 0x00 auth 0x03
    Capability: DisplayYesNo (OOB data not present)
    Authentication: Dedicated Bonding (MITM Protection)
    IO Capability Request Reply (0x01|0x002b) ncmd 1
    status 0x00 bdaddr 90:7F:61:11:2D:1A
    bdaddr 90:7F:61:11:2D:1A capability 0x02 oob 0x00 auth 0x04
    Capability: KeyboardOnly (OOB data not present)
    Authentication: General Bonding (No MITM Protection)
    bdaddr 90:7F:61:11:2D:1A passkey 360665
    bdaddr 90:7F:61:11:2D:1A type 0
    bdaddr 90:7F:61:11:2D:1A type 1
    bdaddr 90:7F:61:11:2D:1A type 1
    bdaddr 90:7F:61:11:2D:1A type 1
    bdaddr 90:7F:61:11:2D:1A type 1
    bdaddr 90:7F:61:11:2D:1A type 1
    bdaddr 90:7F:61:11:2D:1A type 1
    bdaddr 90:7F:61:11:2D:1A type 4
    status 0x00 bdaddr 90:7F:61:11:2D:1A

Dear submitter,

as the package gnome-bluetooth has just been removed from the Debian archive
unstable we hereby close the associated bug reports.  We are sorry
that we couldn't deal with your issue properly.

For details on the removal, please see https://bugs.debian.org/1093420

The version of this package that was in Debian prior to this removal
can still be found using https://snapshot.debian.org/.

Please note that the changes have been done on the master archive and
will not propagate to any mirrors until the next dinstall run at the
earliest.

This message was generated automatically; if you believe that there is
a problem with it please contact the archive administrators by mailing
ftpmaster@ftp-master.debian.org.

Debian distribution maintenance software
pp.
Paul Tagliamonte (the ftpmaster behind the curtain)