Dear Maintainer,
The patch is in the attachment.
Test nr. 6:
Change two HYPHEN-MINUSES (code 0x055, 2D) to an em-dash (\[em]), if one
is intended. An en-dash is usually surrounded by a space, while an em-dash
is used without spaces. "man" (1 byte characters) transforms an en-dash
(\[en] to one HYPHEN-MINUS, and an em-dash to two HYPHEN-MINUSES without
considering the space around it.
432:\fIfile\fP\^: already has .gz suffix -- no change
#####
Test nr. 7:
Change (or include a "FIXME" paragraph about) misused SI (metric)
numeric prefixes (or names) to the binary ones, like Ki (kibi), Mi
(mebi), Gi (gibi), or Ti (tebi), if indicated.
If the metric prefixes are correct, add the definitions or an explanation
to avoid misunderstanding.
179:a few bytes for the gzip file header, plus 5 bytes every 32K block,
#####
Test nr. 8:
Protect a full stop (.) with "\&", if it has a blank (white-space) in front
of or (ignoring transparent characters to the full stop) after it, and it does
not mean an end of a sentence.
50:(A part is delimited by dots.) If the name consists of small parts only,
264:default. (The original name is always saved if the name had to be
265:truncated.) When decompressing, do not restore the original file name
375:transparently. gzip is designed as a complement to tar, not as a
451:(e.g. a symbolic link, socket, FIFO, device file), it is
#####
Test nr. 12:
Change -- in x--y to \(em (em-dash), or, if an
option, to \-\-
8:.RB [ --rsyncable ]
187:.B \-a --ascii
192:.B \-c --stdout --to-stdout
198:.B \-d --decompress --uncompress
201:.B \-f --force
207:and if the option --stdout is also given, copy the input data without change
219:.B \-h --help
222:.B \-k --keep
225:.B \-l --list
239:In combination with the --verbose option, the following fields are also
250:With --name, the uncompressed name, date and time are
253:With --verbose, the size totals and compression ratio for all files
254:is also displayed, unless some sizes are unknown. With --quiet,
257:.B \-L --license
262:.B \-n --no-name
272:.B \-N --name
279:.B \-q --quiet
282:.B \-r --recursive
291:.B --rsyncable
301:.B \-S .suf --suffix .suf
310:.B \-t --test
313:.B \-v --verbose
317:.B \-V --version
320:.B \-# --fast --best
367:size and CRC reported by the --list option applies to the last member
384: for sh: GZIP="-8v --name"; export GZIP
385: for csh: setenv GZIP "-8v --name"
386: for MSDOS: set GZIP=-8v --name
468:and emits a warning by default. You have to use the --quiet option to
472: for sh: GZIP="-q" tar -xfz --block-compress /dev/rst0
473: for csh: (setenv GZIP -q; tar -xfz --block-compr /dev/rst0
488:The --list option reports sizes as -1 and crc as ffffffff if the
491:In some rare cases, the --best option gives worse compression than
#####
Test nr. 15:
Change the name of a macro for two fonts (e.g., BR and IR) to one letter,
if there is only one argument.
Add the second argument if needed. It is sometimes part of the first one.
334:.BR \-6
445:.BR \-v
#####
Test nr. 17:
Change - to \- if it means a minus sign.
233:The uncompressed size is given as -1 for files not in gzip format,
488:The --list option reports sizes as -1 and crc as ffffffff if the
492:the default compression level (-6). On some highly redundant files,
#####
Test nr. 20:
Use a macro to change to the italic font, instead of \fI [1], if
possible.
The macros have the italic corrections, but "\c" removes them.
[1] man-pages(7)
412:\fIfile\fP\^: not in gzip format
417:\fIfile\fP\^: Corrupt input. Use zcat to recover some data.
423:\fIfile\fP\^: compressed with \fIxx\fP bits, can only handle \fIyy\fP bits
432:\fIfile\fP\^: already has .gz suffix -- no change
#####
Test nr. 21:
Use the word (in)valid instead of (il)legal if not related to legal matters.
See "www.gnu.org/prep/standards".
72:legal.
#####
Test nr. 22:
Remove space in the first column, if not indented.
Use ".in +<number>n" and ".in", ".nf" and ".fi" for an extra indention.
228: compressed size: size of the compressed file
229: uncompressed size: size of the uncompressed file
230: ratio: compression ratio (0.0% if unknown)
231: uncompressed_name: name of the uncompressed file
237: zcat file.Z | wc -c
242: method: compression method
243: crc: the 32-bit CRC of the uncompressed data
244: date & time: time stamp for the uncompressed file
341: gzip -c file1 > foo.gz
342: gzip -c file2 >> foo.gz
346: gunzip -c foo
350: cat file1 file2
356: cat file1 file2 | gzip > foo.gz
360: gzip -c file1 file2 > foo.gz
364: gzip -cd old.gz | gzip > new.gz
370: gzip -cd file.gz | wc -c
384: for sh: GZIP="-8v --name"; export GZIP
385: for csh: setenv GZIP "-8v --name"
386: for MSDOS: set GZIP=-8v --name
421: zcat \fIfile\fP > recover
472: for sh: GZIP="-q" tar -xfz --block-compress /dev/rst0
473: for csh: (setenv GZIP -q; tar -xfz --block-compr /dev/rst0
486: zcat file.gz | wc -c
#####
Test nr. 24:
Change a HYPHEN-MINUS (code 0x55, 2D) to a minus (\-), if in front of a
name for an option.
65:.I gzip -d
102:.I "compress -H"
123:The SCO compress -H format (lzh compression method) does not include a CRC
135:.IR "gunzip -S .zip foo.zip" .
237: zcat file.Z | wc -c
247:(SCO compress -H) and pack. The crc is given as ffffffff for a file
341: gzip -c file1 > foo.gz
342: gzip -c file2 >> foo.gz
346: gunzip -c foo
360: gzip -c file1 file2 > foo.gz
364: gzip -cd old.gz | gzip > new.gz
370: gzip -cd file.gz | wc -c
374:such as tar or zip. GNU tar supports the -z option to invoke gzip
472: for sh: GZIP="-q" tar -xfz --block-compress /dev/rst0
473: for csh: (setenv GZIP -q; tar -xfz --block-compr /dev/rst0
475:In the above example, gzip is invoked implicitly by the -z option of
486: zcat file.gz | wc -c
#####
Test nr. 28:
Wrong distance between sentences or protect the indicator.
1) Separate the sentences and subordinate clauses; each begins on a new
line. See man-pages(7) and "info groff".
Or
2) Adjust space between sentences (two spaces),
3) or protect the indicator by adding "\&" after it.
The "indicator" is an "end-of-sentence character" (.!?).
50:(A part is delimited by dots.) If the name consists of small parts only,
51:the longest parts are truncated. For example, if file names are limited
58:keeps the original file name and timestamp in the compressed file. These
61:option. This is useful when the compressed file name was truncated or
108:checks a 32 bit CRC. For
112:checks the uncompressed length. The standard
114:format was not designed to allow consistency checks. However
116:is sometimes able to detect a bad .Z file. If you get an error
120:does not complain. This generally means that the standard
129:with the 'deflation' method. This feature is only intended to help
178:slightly larger than the original. The worst case expansion is
180:or an expansion ratio of 0.015% for large files. Note that the actual
188:Ascii text mode: convert end-of-lines using local conventions. This option
189:is supported only on some non-Unix systems. For MSDOS, CR LF is converted
195:independently compressed members. To obtain better compression,
204:is read from or written to a terminal. If the input data is not in
234:such as compressed .Z files. To get the uncompressed size for such a file,
254:is also displayed, unless some sizes are unknown. With --quiet,
264:default. (The original name is always saved if the name had to be
265:truncated.) When decompressing, do not restore the original file name
269:time stamp if present (copy it from the compressed file). This option
274:is the default. When decompressing, restore the original file name and
275:time stamp if present. This option is useful on systems which have
283:Travel the directory structure recursively. If any of the file names
311:Test. Check the compressed file integrity.
314:Verbose. Display the name and percentage reduction for each file compressed
318:Version. Display the version number and compilation options then quit.
337:Multiple compressed files can be concatenated. In this case,
339:will extract all members at once. For example:
353:still be recovered (if the damaged member is removed). However,
368:only. If you need the uncompressed size for all members, you can use:
374:such as tar or zip. GNU tar supports the -z option to invoke gzip
375:transparently. gzip is designed as a complement to tar, not as a
383:explicit command line parameters. For example:
395:file format is specified in P. Deutsch, \s-1GZIP\s0 file format
401:deflation format is specified in P. Deutsch, \s-1DEFLATE\s0 Compressed
407:if an error occurs, exit status is 1. If a warning occurs, exit status is 2.
417:\fIfile\fP\^: Corrupt input. Use zcat to recover some data.
418:The compressed file has been damaged. The data up to the point of failure
451:(e.g. a symbolic link, socket, FIFO, device file), it is
457:for more information. Use the
462:pad the output with zeroes up to a block boundary. When the data is
468:and emits a warning by default. You have to use the --quiet option to
469:suppress the warning. This option can be set in the
476:GNU tar. Make sure that the same block size (-b option of tar) is used
492:the default compression level (-6). On some highly redundant files,
#####